Advertisements
Advertisements
प्रश्न
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 1.
Advertisements
उत्तर
Given:
Output
\[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\]
A = B = C = 1
\[X = 1 . ( \overline{{1 . 1)}} + 1 . ( \overline{{1 . 1)}} + 1 . ( \overline{{1 . 1)}}\]
\[ = 1 . \bar{1} + 1 . \bar{1} + 1 . \bar{1}\]
\[ = 1 . 0 + 1 . 0 + 1 . 0\]
\[ = 0 + 0 + 0\]
\[ = 0\]
APPEARS IN
संबंधित प्रश्न
The logic gate which produces LOW output when one of the input is HIGH and produces
HIGH output only when all of its inputs are LOW is called _______.
(A) AND gate
(B) OR gate
(C) NOR gate
(D) NAND gate
Write the truth table for a NAND gate connected as given in the following figure.
Hence identify the exact logic operation carried out by this circuit
The arrangement given below represents a logic gate :
Copy the following truth table in your answer booklet and complete it showing outputs at C
and D.
| A | B | C | D |
| 0 | 0 | ||
| 1 | 0 | ||
| 0 | 1 | ||
| 1 | 0 |
Answer the following question :
Distinguish between digital and analogue signals.
Identify the logic gate represented by the circuit as shown and write its truth table.
The following figure shows the input waveforms (A, B) and the output waveform (Y) of a gate. Identify the gate, write its truth table and draw its logic symbol.
What will be the values of input A and B for the Boolean expression `overline ((A +B) .(A*B)) =1?`
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 0.
Show the variation of voltage with time, for a digital signal.
You are given a circuit as shown in the figure, which consists of the NAND gate. Identify the logic operation carried out by the two. Write the truth table. Identify the gates equivalent to the tow circuit.
The current obtained from a simple filterless rectifier is
A radar is sending out pules of 1 micro second duration at interval of 100 micro-second. The range of the radar is
An oscillator is nothing but an amplifier with
Two car garages have a common gate which needs to open automatically when a car enters either of the garages or cars enter both. Devise a circuit that resembles this situation using diodes for this situation.
How would you set up a circuit to obtain NOT gate using a transistor?
Write the truth table for the circuit shown in figure. Name the gate that the circuit resembles.
An X-OR gate has following truth table:
| A | B | Y |
| 0 | 0 | 0 |
| 0 | 1 | 1 |
| 1 | 0 | 1 |
| 1 | 1 | 0 |
It is represented by following logic relation `Y = barA.B + A.barB`. Build this gate using AND, OR and NOT gates.
A logic gate circuit has two inputs A and B and output Y. The voltage waveforms of A, B and Y are shown below.
The logic gate circuit is ______.
Which of the following gives a reversible operation?
