Advertisements
Advertisements
प्रश्न
How does the liquid pressure on a diver change according to the following condition:
When the driver moves to the greater depth?
Advertisements
उत्तर
When diver moves to depth, depth h increases, and thus pressure increases as diver moves to depth.
APPEARS IN
संबंधित प्रश्न
Define one pascal (Pa), the S.I. unit of pressure.
In a hydraulic machine, a force of 2 N is applied on the piston of area of cross section 10 cm2. What force is obtained on its piston of area of cross section 100 cm2 ?
The area of cross-sections of the pump plunger and press plunger of a hydraulic press is 0.02 m2 and 8 m2 respectively. If the hydraulic press overcomes a load of 800 kgf, calculate the force acting on the pump plunger.
Define the SI unit of pressure.
The following figure shows a manometer containing a liquid of density p. The limb P of the manometer is connected to a vessel V and the limb Q is open to atmosphere. The difference in the levels of liquid in the two limbs of the manometer is h as shown in the diagram. The atmospheric pressure is P0.
(i) What is the pressure on the liquid surface in the limb Q?
(ii) What is the pressure on the liquid surface in the limb P?
Do all liquids exert pressure?
Analogy
Pascal’s law: ______:: Surface tensin: ______.
A hydraulic press can lift 100 kg when a mass 'm' is placed on the smaller piston. It can lift ______ kg when the diameter of the larger piston is increased by 4 times and that of the smaller piston is decreased by 4 times keeping the same mass 'm' on the smaller piston.
