Advertisements
Advertisements
प्रश्न
How does the liquid pressure on a diver change according to the following condition:
When the driver moves to the greater depth?
Advertisements
उत्तर
When diver moves to depth, depth h increases, and thus pressure increases as diver moves to depth.
APPEARS IN
संबंधित प्रश्न
Draw a simple diagram of a hydraulic jack and explain its working.
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
A force of 50 kgf is applied to the smaller piston of a hydraulic machine. Neglecting friction, find the force exerted on the large piston, if the diameters of the pistons are 5 cm and 25 cm respectively.
The pressure in the water pipe on the ground floor of a building is 40000 pascals, whereas on the first floor it’s 10000 pascals. Find the height of the first floor. (Acceleration due to gravity g = 10 ms−2)
The following figure shows a manometer containing a liquid of density p. The limb P of the manometer is connected to a vessel V and the limb Q is open to atmosphere. The difference in the levels of liquid in the two limbs of the manometer is h as shown in the diagram. The atmospheric pressure is P0.
(i) What is the pressure on the liquid surface in the limb Q?
(ii) What is the pressure on the liquid surface in the limb P?
State the principle on which Brahma press depends.
Match the following:
| 1. | Hydraulic press | a. | Archimedes |
| 2. | Cartesian Diver | b. | Floatation |
| 3. | Hydrostatic Balance | c. | Pascal’s law |
| 4. | Hydrometer | d. | Buoyancy |
An iceberg of density 700 kg/m3 is floating in the water of density 1000 kg/m3. The percentage of the volume of ice cube outside the water is:
