Advertisements
Advertisements
प्रश्न
Electrical power P is given by the expression P = (Q × V) ÷ time. What do the symbols Q and V represent?
Advertisements
उत्तर
Q represents charge, and V represents voltage or potential difference.
APPEARS IN
संबंधित प्रश्न
Which particles are responsible for current in conductors?
The diagram below shows a circuit containing a lamp L, a voltmeter and an ammeter,. The voltmeter reading 3 V and the ammeter reading is 0.5 A.
What is the resistance of the lamp?
What is the power of the lamp?
1Kwh =`( 1 "volt "xx 1 am pere xx.............)/1000`
Two bulbs are rated 60 W, 220 V and 60 W, 110 V respectively. Calculate the ratio of their
resistances
A servo voltage stabiliser restricts the voltage output to 220 V ± 1%. If an electric bulb rated at 220 V, 100 W is connected to it, what will be the minimum and maximum power consumed by it?
Tick(✓) the correct choice in the following:
In the circuit shown in the following fig, the e.m.f. of the cell is 4 volts, the current
flowing through the resistor is
An electric bulb of resistance 500 Ω draws current 0.4 A from the source. Calculate:
- the power of bulb and
- the potential difference at its end.
Name a metal that is used as an electron emitter. Give one reason for using this metal.
1 mV is equal to:
1 kWh = ____________
