Advertisements
Advertisements
प्रश्न
Electrical power P is given by the expression P = (Q × V) ÷ time. What do the symbols Q and V represent?
Advertisements
उत्तर
Q represents charge, and V represents voltage or potential difference.
APPEARS IN
संबंधित प्रश्न
An electric bulb is rated at 220 V, 100 W. What is its resistance?
An electric kettle connected to the 230 V mains supply draws a current of 10 A. Calculate:
(a) the power of the kettle.
(b) the energy transferred in 1 minute.
Write the formula for electric power in terms of potential difference and current.
List the names of three electrical gadgets used in your house. Write their power, voltage ratingand approximate time for which each one is used in a day. Hence find the electrical energyconsumed by each in a day.
Two resistors A and B of resistance 4 Ω and 6 Ω respectively are connected in parallel. The combination is connected across a 6 volt battery of negligible resistance. Calculate: (i) the power supplied by the battery, (ii) the power dissipated in each resistor.
A servo voltage stabiliser restricts the voltage output to 220 V ± 1%. If an electric bulb rated at 220 V, 100 W is connected to it, what will be the minimum and maximum power consumed by it?
An electric bulb of resistance 500 Ω draws current 0.4 A from the source. Calculate:
- the power of bulb and
- the potential difference at its end.
A family uses a light bulb of 100W, a fan of 100W, and a heater of 1000W, each for 8 hours a day. If the cost of electricity is Rs. 2 per unit, what is the expenditure to the family per day, on electricity?
An electric appliance is rated at 1000 W, 250V. Calculate:
(i) The electrical energy consumed by the appliance in 12 hour.
(ii) The cost of energy consumed at Rs. 1.20 per kWh.
How long would this appliance take to use 1 kWh energy when operated at 250 V?
