Advertisements
Advertisements
प्रश्न
Choose the correct alternative:
R is calculated using
विकल्प
xmax – xmin
xmin – xmax
`bar"X"_"max" - bar"X"_"min"`
`\overset{==}{"X"}_"max" - \overset{==}{"X"}_"min"`
Advertisements
उत्तर
xmax – xmin
APPEARS IN
संबंधित प्रश्न
Define a control chart
Define the mean chart
Write the control limits for the R chart
A machine is set to deliver packets of a given weight. Ten samples of size five each were recorded. Below are given relevant data:
| Sample number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| `bar"X"` | 15 | 17 | 15 | 18 | 17 | 14 | 18 | 15 | 1 | 16 |
| R | 7 | 7 | 4 | 9 | 8 | 7 | 12 | 4 | 11 | 5 |
Calculate the control limits for mean chart and the range chart and then comment on the state of control, (conversion factors for n = 5, A2 = 0.58, D3 = 0 and D4 = 2.115)
Construct `bar"X"` and R charts for the following data:
| Sample Number | Observations | ||
| 1 | 32 | 36 | 42 |
| 2 | 28 | 32 | 40 |
| 3 | 39 | 52 | 28 |
| 4 | 50 | 42 | 31 |
| 5 | 42 | 45 | 34 |
| 6 | 50 | 29 | 21 |
| 7 | 44 | 52 | 35 |
| 8 | 22 | 35 | 44 |
(Given for n = 3, A2 = 1.023, D3 = 0 and D4 = 2.574)
A quality control inspector has taken ten samples of size four packets each from a potato chips company. The contents of the sample are given below, Calculate the control limits for mean and range chart.
| Sample Number | Observations | |||
| 1 | 2 | 3 | 4 | |
| 1 | 12.5 | 12.3 | 12.6 | 12.7 |
| 2 | 12.8 | 12.4 | 12.4 | 12.8 |
| 3 | 12.1 | 12.6 | 12.5 | 12.4 |
| 4 | 12.2 | 12.6 | 12.5 | 12.3 |
| 5 | 12.4 | 12.5 | 12.5 | 12.5 |
| 6 | 12.3 | 12.4 | 12.6 | 12.6 |
| 7 | 12.6 | 12.7 | 12.5 | 12.8 |
| 8 | 12.4 | 12.3 | 12.6 | 12.5 |
| 9 | 12.6 | 12.5 | 12.3 | 12.6 |
| 10 | 12.1 | 12.7 | 12.5 | 12.8 |
(Given for n = 5, A2 = 0.58, D3 = 0 and D4 = 2.115)
Choose the correct alternative:
Variations due to natural disorder is known as
Choose the correct alternative:
The assignable causes can occur due to
Choose the correct alternative:
`bar"X"` chart is a
The following data gives the average life(in hours) and range of 12 samples of 5lamps each. The data are
| Sample No | 1 | 2 | 3 | 4 | 5 | 6 |
| Sample Mean | 1080 | 1390 | 1460 | 1380 | 1230 | 1370 |
| Sample Range | 410 | 670 | 180 | 320 | 690 | 450 |
| Sample No | 7 | 8 | 9 | 10 | 11 | 12 |
| Sample Mean | 1310 | 1630 | 1580 | 1510 | 1270 | 1200 |
| Sample Range | 380 | 350 | 270 | 660 | 440 | 310 |
Construct control charts for mean and range. Comment on the control limits.
