Advertisements
Advertisements
प्रश्न
Can absolute electrode potential of an electrode be measured?
Advertisements
उत्तर
No. It cannot be measured. We can only measure the difference in electrode potential between the two half-cells. We can also measure electrode potential difference concerning a standard electrode.
APPEARS IN
संबंधित प्रश्न
Among Zn and Cu, which would occur more readily in nature as metal and which as an ion?
Define the following term:
Fuel cell
For the electrochemical cell:
\[\ce{M | M+ || X- | X}\];
\[\ce{E^{\circ}_{{M^{+}/{M}}}}\] = 0.44 V,
\[\ce{E^{\circ}_{X/X^-}}\] = 0.33 V
Which of the following is TRUE for this data?
A solution of CuSO4 is electrolysed using a current of 1.5 amperes for 10 minutes. What mass of Cu is deposited at cathode? [Atomic mass of Cu = 63.7]
What is the SI unit tor electrochemical equivalent?
In the electrochemical cell: Zn|ZnSO4 (0.01 M)||CuSO4 (1.0 M)|Cu, the emf of this Daniel cell is E1. When the concentration of ZnSO4 is changed to 1.0 M and that CuSO4 changed to 0.01 M, the emf changes to E2. From the above, which one is the relationship between E1 and E2?
Consider the change in the oxidation state of Bromine corresponding to different emf values as shown in the expression below:
\[\ce{BrO^-_4 ->[1.82 V] BrO^-_3 ->[1.5 V] HBrO ->[1.595 V] Br2 ->[1.0652 V] Br^-}\]
Then the species undergoing disproportionation is:
A gas X at 1 atm is bubbled through a solution containing a mixture of 1 MY− and 1 MZ− at 25°C. If the reduction potential of Z > Y > X, then ______.
Define cathode
Describe the construction of Daniel cell. Write the cell reaction.
Why is anode in galvanic cell considered to be negative and cathode positive electrode?
For the cell \[\ce{Mg_{(s)}|Mg^{2+}_{( aq)}||Ag^+_{( aq)}|Ag_{(s)}}\], calculate the equilibrium constant at 25°C and maximum work that can be obtained during operation of cell.
Given: \[\ce{E^0_{{Mg^{2+}|Mg}}}\] = −2.37 V and \[\ce{E^0_{{Ag^{+}|Ag}}}\] = 0.80 V
Use the data given in below find out the most stable oxidised species.
`E^0 (Cr_2O_1^(2-))/(Cr_(3+))` = 1.33 V `E^0 (Cl_2)/(Cl^-)` = 1.36 V
`E^0 (MnO_4^-)/(MN^(2+))` = 1.51 V `E^0 (Cr^(3+))/(Cr)` = – 0.74 V
`E_(cell)^Θ` for some half cell reactions are given below. On the basis of these mark the correct answer.
(a) \[\ce{H^{+} (aq) + e^{-} -> 1/2 H_2 (g); E^Θ_{cell} = 0.00V}\]
(b) \[\ce{2H2O (1) -> O2 (g) + 4H^{+} (aq) + 4e^{-}; E^Θ_{cell} = 1.23V}\]
(c) \[\ce{2SO^{2-}_{4} (aq) -> S2O^{2-}_{8} (aq) + 2e^{-}; E^Θ_{cell} = 1.96V}\]
(i) In dilute sulphuric acid solution, hydrogen will be reduced at cathode.
(ii) In concentrated sulphuric acid solution, water will be oxidised at anode.
(iii) In dilute sulphuric acid solution, water will be oxidised at anode.
(iv) In dilute sulphuric acid solution, \[\ce{SO4^{2-}}\] ion will be oxidised to tetrathionate ion at anode.
Consider a cell given below:
\[\ce{Cu | Cu^{2+} || Cl^{-} | Cl_{2},Pt}\]
Write the reactions that occur at anode and cathode
Galvanic cell is a device in which ______.
Calculate the λ0m for Cl- ion from the data given below:
∧0m MgCl2 = 258.6 Scm2 mol-1 and λ0m Mg2+ = 106 Scm2 mol-1
What are electrochemical reactions?
