Advertisements
Advertisements
प्रश्न
What is the purpose of fuse in an electrical circuit?
Advertisements
उत्तर १
An electric fuse is a device which is used to Ii m it the current in an electric circuit. The use of a fuse thus safeguards the circuit and appliances connected in that circuit from being damaged. It is a short piece of wire made of an alloy of lead and tin. If the current passing through the fuse exceeds the safeguard Ii m it the heat produced melts the fuse and this breaks the circuit.
उत्तर २
Fuse is a safety device which is used to limit the current in an electric circuit.
APPEARS IN
संबंधित प्रश्न
For a heater rated at 4 kW and 220 V, calculate:
(a) the current,
(b) the resistance of the heater,
(c) the energy consumed in 2 hours, and
(d) the cost if 1 kWh is priced at Rs 4.60.
Define the following:
Semiconductors
Two resistors P and Q of the same material and length but of different thickness are connected in parallel to a battery. The cross- sectional area of P is twice that of Q. What is the ratio of
(a) The resistance of P to the resistance of Q?
(b) The current in P to the current in Q?
A 3 pin mains plug is fitted to the lead for a 1 kW electric kettle to be used on a 250 V A.C. supply. Which of the following statements is NOT correct?
(a) A 13 A fuse is the most appropriate value to use.
(b) The brown wire should be connected to the live side of the mains.
Fig . shows the core of a transformer and i ts input and output connections
State the material used for the core and describe th e structure of the core.
(a) Use the values given in the diagram to calculate the turns ratio for the transformer and connections, labeling all parts of the diagram .
(b) If a current of 2 A is taken from th e output, calculate th e current in the input circuit (Assume the transformer to be ideal ).
State expression for Cells connected in series.
State the condition when it is advantageous to connect cells in parallel.
Unit of electric power may also be expressed as
Electric current passes through a metallic conductor due to the movement of ______.
