Advertisements
Advertisements
प्रश्न
A device X used in communication system can convert one form of energy into another. Name the device X. Explain the function of a repeater in a communication system.
Advertisements
उत्तर
The device X used in communication system, which can convert one form of energy into another is called a transducer.
Function of repeater: A repeater is used to increase the range of the transmission in communication systems with the help of a set of receiver and transmitter. They are erected at suitable locations in between the transmitter and the receiver. Each repeater receives the transmitted signal, amplifies it properly keeping its original form intact and then relays it to the next repeater.
APPEARS IN
संबंधित प्रश्न
Explain the terms : Transmitter in communication system
Write the functions of the following in communication systems:
Modulator
Write the functions of the following in communication systems:
Transducer
Write the functions of the following in communication systems:
Demodulator
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
Write the function of receiver in communication system.
What is the function of a bandpass filter used in a modulator for obtaining AM signal?
A basic communication system consists of ______.
- transmitter.
- information source.
- user of information.
- channel.
- receiver.
Choose the correct sequence in which these are arranged in a basic communication system:
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
