Advertisements
Advertisements
प्रश्न
Audio sine waves of 3 kHz frequency are used to amplitude modulate a carrier signal of 1.5 MHz. Which of the following statements are true?
- The sideband frequencies are 1506 kHz and 1494 kHz.
- The bandwidth required for amplitude modulation is 6 kHz.
- The bandwidth required for amplitude modulation is 3 MHz.
- The side band frequencies are 1503 kHz and 1497 kHz.
विकल्प
a and b
b and d
c and a
b and c
Advertisements
उत्तर
b and d
Explanation:
LSB = `(ω_c) = (ω_m)`
= `1.5 xx 10^6 - 3 xx 10^3`
= 1497 kHz
And USB = `(ω_c) + (ω_m)`
= 1503 kHz
Bandwidth required = USB – LSB = `2ω_m`
= `2 xx 3 kHz`
= 6 kHz
Also,bandwidth = 2fm = 2 × 3 = 6 KHz
APPEARS IN
संबंधित प्रश्न
Explain the terms : Transmitter in communication system
Write the functions of the following in communication systems:
Modulator
Write the functions of the following in communication systems:
Transducer
Write the functions of the following in communication systems:
Receiver
Write the functions of the following in communication systems:
Demodulator
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
Write the functions of the transducer and repeaters.
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
Which of the following would produce analog signals and which would produce digital signals?
- A vibrating tuning fork.
- Musical sound due to a vibrating sitar string.
- Light pulse.
- Output of NAND gate.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
