Advertisements
Advertisements
Question
Electroplating of ______ is done on objects like water taps and cycle bell to give them a shiny appearance.
Advertisements
Solution
Electroplating of chromium is done on objects like water taps and cycle bell to give them a shiny appearance.
Explanation:
Because chromium has a shiny appearance, it resists scratches and does not corrode.
APPEARS IN
RELATED QUESTIONS
If you pass current through copper sulphate solution, copper gets deposited on the plate connected to the ______ terminal of the battery.
The process that you saw in the image is used for the purification of copper. A thin plate of pure copper and a thick rod of impure copper are used as electrodes. Copper from impure rod is sought to be transferred to the thin copper plate. Which electrode should be attached to the positive terminal of the battery and why?
In an electrolyte the current is due to the flow of ______.
An electric current can produce
Paheli set up an experiment using liquid A in the beaker as shown in the following figure. She observed that the bulb glows. Then she replaced the liquid A by another liquid B. This time the bulb did not glow. Boojho suggested replacing the bulb by an LED. They observed that the LED glows. Explain.
Paheli wants to deposit silver on an iron spoon. She took silver nitrate (AgNO3) solution in a beaker and set up a simple circuit for electroplating. Which terminal of the battery should the spoon be connected to? What material should the other electrode be made of?
Observe the following circuits carefully. In which circuit will the bulb glow? Write Yes or No in the blank space provided along each of the circuit given in the figure.
|
(a) |
|
______ |
|
(b) |
|
______ |
|
(c) |
|
______ |
|
(d) |
|
______ |
A chemical reaction happens when electricity passes through various conducting liquids.
Explain the following:
Short circuit.
The most common industrial application of chemical effects of electric current is ______.
