Advertisements
Advertisements
Question

A metal rod AB of length 80 cm is balanced at 45 cm from the end A with 100 gf weights suspended from the two ends.
- If this rod is cut at the center, C, then compare the weight of AC to the weight of BC. (Use >, < or =)
- Give a reason for your answer in (a).
Advertisements
Solution
a. Given, Weight at the end A (WA) = 100 gf
Weight at the end B (WB) = 100 gf
Length of the rod (L) = 80 cm
Distance of A from the fulcrum (lA) = 45 cm
Distance of B from the fulcrum (lB) = 80 cm − 45 cm = 35 cm
Let the weight of the rod AC be (WAC) and the distance of the center of gravity of the rod AC from the fulcrum be (lAC).
Weight of the rod BC is (WBC) and the distance of the center of gravity of the rod BC from the fulcrum is (lBC).
Here,
(lAC) = 45 − 20 = 25 cm
(lBC) = 60 − 45 = 15 cm
Now,
Anticlockwise moment (due to weight of 100 gf at end A and weight of rod AC) = lA × WA + lAC × WAC
= 45 × 100 + 25 × WAC
Clockwise moment (due to weight of 100 gf at end B and weight of rod BC) = lB × WB + lBC × WBC
= 35 × 100 + 15 × WBC
As system is balanced, then for equilibrium,
Anticlockwise moment of force about the fulcrum = Clockwise moment of force about the fulcrum
45 × 100 + 25 × WAC = 35 × 100 + 15 × WBC
⇒ 4500 + 25WAC = 3500 + 15WBC
⇒ 15WBC − 25WAC = 4500 − 3500
⇒ 15WBC − 25WAC = 1000
⇒ 3WBC − 5WAC = 200
⇒ 3WBC − 5WAC > 0
⇒ 3WBC > 5WAC
⇒ `"W"_"BC"/"W"_"AC" > 5/3 > 1`
⇒ WBC > WAC
Hence, the weight of AC < the weight of BC.
b. Even though the weights present are the same at both ends and the torque arm of B is less than the torque arm of A. This means the moment of the weight of the rod acts from side B and the C.G. lies beyond 45. Thus, more weight is concentrated between C to B.
APPEARS IN
RELATED QUESTIONS
Thrust is the ............ force acting on a surface.
How does the effect of force differ when it is applied on a rigid body?
State the effect of force F in of the following diagram.

It is easier to turn the steering wheel of a large diameter than that of a small diameter. Given reason.
The figure shows two forces each of magnitude 10 N acting at the point A and B at a separation of 50 cm, in opposite directions. Calculate the resultant moment of two forces about the point.
- A,
- B and
- O situated exactly at the middle of the two forces.

The diagram in the figure shows a uniform metre rule weighing 100 gf, pivoted as its centre O. two weight 150 gf and 250 gf hang from the point A and B respectively of the metre rule such that OA = 40 cm and OB = 20 cm . Calculate
the total anticlockwise moment about o.

Write the expression for the moment of force about a given axis.
State one factor on which the magnitude of a non-contact force depends. How does the magnitude of a non-contact force change along with distance?
A couple of 15 N force acts on a rigid body, such that arm of couple is 85 cm. Calculate moment of couple in the SI system.
Calculate the length of arm of couple, if a force of 13 N produces a moment of couple of 14.3 Nm.
