Advertisements
Advertisements
Question
A field is 150 m long and 100 m wide. A plot (outside the field) 50 m long and 30 m wide is dug to a depth of 8 m and the earth taken out from the plot is spread evenly in the field. By how much is the level of field raised?
Advertisements
Solution
\[\text{ The dimensions of the plot dug outside the field are 50 m } \times 30 m \times 8 m . \]
\[\text { Hence, volume of the earth dug - out from the plot = 50 } \times 30 \times 8 = 12000 m^3 \]
\[\text { Suppose that the level of the earth rises by h m } . \]
\[\text { When we spread this dug - out earth on the field of length 150 m, breadth 100 m and height h m, we have: }\]
\[\text { Volume of earth dug - out = 150 } \times 100 \times h\]
\[ \Rightarrow 12000 = 15000 \times h\]
\[ \Rightarrow h=\frac{12000}{15000}=0.8 m\]
\[ \Rightarrow h = 80 cm ( \because 1 m = 100 cm)\]
\[\therefore \text { The level of the field will rise by 80 cm }.\]
RELATED QUESTIONS
Parveen wanted to make a temporary shelter for her car, by making a box-like structure with tarpaulin that covers all the four sides and the top of the car (with the front face as a flap which can be rolled up). Assuming that the stitching margins are very small, and therefore negligible, how much tarpaulin would be required to make the shelter of height 2.5 m, with base dimensions 4 m × 3 m?
What will happen to the volume of a cuboid if its Length is doubled, height is same and breadth is halved?
A tank open at the top is made of iron sheet 4 m wide. If the dimensions of the tank are 12 m × 8 m × 6 m, find the cost of iron sheet at Rs 17.50 per metre.
If each edge of a cube is increased by 50%, the percentage increase in its surface area is
Find the volume and total surface area of a cube whose each edge is:
(i) 8 cm
(ii) 2 m 40 cm.
Find the height of the cylinder whose radius is 7 cm and the total surface area is 1100 cm2.
Find the Total Surface Area and the Lateral Surface Area of a cuboid whose dimensions are: length = 20 cm, breadth = 15 cm, height = 8 cm
Below are the drawings of cross sections of two different pipes used to fill swimming pools. Figure A is a combination of 2 pipes each having a radius of 8 cm. Figure B is a pipe having a radius of 15 cm. If the force of the flow of water coming out of the pipes is the same in both the cases, which will fill the swimming pool faster?

