Advertisements
Advertisements
प्रश्न
What force is applied on a piston of area of cross section 2 cm2 to obtain a force 150 N on the piston of area of cross section 12 cm2 in a hydraulic machine?
Advertisements
उत्तर
In a hydraulic machine
Pressure on narrow piston = Pressure on wider piston
∴ P1 = P2
∴ `F_1/A_1 = F_2/A_2`
∴ `F_1/(2 xx 10^-4) = 150/(12 xx 10^-4)`
∴ `F_1 = 150/(12 xx 10^-4) xx 2 xx 10^-4`
∴ `F_1 = 150/12 xx 2 = 25` N
संबंधित प्रश्न
Consider the equations `P=lim_(triangles->0)"F"/(triangle"S")` and P1 - P2 = pgz. In an elevator accelerating upward
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
If the mechanical advantage of the handle of the pump plunger is 8, calculate the force applied at the end of the handle of the pump plunger.
State Pascal's law.
State the principle on which Brahma press depends.
State and explain Pascal's law of transmission of pressure.
Match the following:
| 1. | Hydraulic press | a. | Archimedes |
| 2. | Cartesian Diver | b. | Floatation |
| 3. | Hydrostatic Balance | c. | Pascal’s law |
| 4. | Hydrometer | d. | Buoyancy |
Consider a water tank shown in the figure. It has one wall at x = L and can be taken to be very wide in the z direction. When filled with a liquid of surface tension S and density ρ, the liquid surface makes angle θ(θ << 1) with the x-axis at x = L. If y(x) is the height of the surface then the equation for y(x) is:
(take θ(x) = sin θ(x) = tan θ(x) = `dy/dx`, g is the acceleration due to gravity)
