मराठी

Two Pendulums C and D Are Suspended from a Wire as Shown in the Figure Give Below. Pendulum C is Made to Oscullate by Displaying It from Its Mean Position.

Advertisements
Advertisements

प्रश्न

Two pendulums C and D are suspended from a wire as shown in the figure give below. Pendulum C is made  to oscullate by displaying it from its mean position. It is seen that D also starts oscillating. 

(i) Name the type of oscillation, C will execute.
(ii) Name the type of oscillation, D will execute.
(iii) If the length of D is made equal to C then what difference will you notice in the oscillations of D ?
(iv) What is the name of the phenomenon when the length of D is made equal to C ?

टीपा लिहा
Advertisements

उत्तर

(i) C will execute damped oscillation.
(ii) D will execute forced oscillation.
(iii) D will start executing with very large amplitude.
(iv) Resonance

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
2018-2019 (March) Set 1

संबंधित प्रश्‍न

In the diagram below, A, B, C, D are four pendulums suspended from the same elastic string PQ. The length of A and C are equal to each other while the length of pendulum B is smaller than that of D. Pendulum A is set into a mode of vibrations

1) Name the type of vibrations taking place in pendulums B and D?

2) What is the state of pendulum C?

3) State the reason for the type of vibrations in pendulum B and C.


When a troop crosses a suspension bridge, the soldiers are asked to break steps. Explain the reason.


How do you tune your radio set to a particular station ? Name the phenomenon involved in doing so and define it.


A rifle shot is fired in a valley between two parallel walls. The echo from one wall is heard in 3 s and the echo from the other wall is heard 3 s later. If the velocity of sound at 00c is 330 ms-1 and the temperature in the valley is 100c, calculate the width of the valley. For every 10c rise in temperature, the velocity of sound increase by 0.61 ms-1.

Give the physical explanation for the difference between musical sounds and noises.

When acoustic resonance takes place, a loud sound is heard. Why does this happen? Explain.


The rearview mirror of a motorbike starts vibrating violently at some particular speed of the motorbike, what could be done to stop the violent vibrations.


Explain a tuning fork (vibrating) is held close to ear. One hears a faint sound. The same vibrating tuning fork is placed on table, such that its handle is in contact with table, one hears a loud sound.


A vibrating tuning fork is placed over the mouth of a burette filled with water. The tap is opened and the water level gradually falls. It is observed that the sound becomes the loudest for a particular length of the air column. What is the name of the phenomenon taking place when this happens? Why does the sound become the loudest?


What do you understand by forced vibrations?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×