मराठी

A Tuning Fork of Frequency 256 Hz Will Resonate with Another Tuning Fork of Frequency:

Advertisements
Advertisements

प्रश्न

A tuning fork of frequency 256 Hz will resonate with another tuning fork of frequency:

पर्याय

  • 128 Hz

  • 256 Hz

  • 384 Hz

  • 512 Hz

MCQ
Advertisements

उत्तर

A tuning fork of frequency 256 Hz will resonate with another tuning fork of frequency 256 Hz.

Hint: Resonance occurs when the frequency of an externally applied periodic force on the body is equal to its natural frequency.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?

संबंधित प्रश्‍न

Name the phenomenon involved in tunning a radio set to a particular station


Why is a loud sound heard at resonance?


In following figure shows  A, B , C and D represent test tube each of height 20 cm which are filled with water up to heights of 12 cm, 14 cm, 16cm and 18cm respectively. If a vibrating tuning fork is placed over the mouth if test tube D, a loud sound is heard.

  1. Describe the observations with the tubes A, B and C when the vibrating tuning fork is placed over the mouth of these tubes.
  2. Give the reason for your observation in each case.
  3. State the principle illustrated by the above experiment.

Name the phenomenon involved in tuning your radio set to a particular station  and define it.


In fig. , P, Q, R and S represent test tubes each of height 20 cm which are filled with water upto heights of 10 cm, 14 cm, 16 cm and 18 cm respectively. If a vibrating tuning fork is placed over the mouth of test tube Q, a loud sound is heard.
(i) Describe the observations with the tubes P, R and S.
(ii) Give the reason for your observation in each case.
(iii) State the principle illustrated by the above experiment.


What is meant by resonance? Give two examples of resonance from daily life.

The rearview mirror of a motorbike starts vibrating violently at some particular speed of the motorbike, what could be done to stop the violent vibrations.


Explain a tuning fork (vibrating) is held close to ear. One hears a faint sound. The same vibrating tuning fork is placed on table, such that its handle is in contact with table, one hears a loud sound.


A vibrating tuning fork is placed over the mouth of a burette filled with water. The tap is opened and the water level gradually falls. It is observed that the sound becomes the loudest for a particular length of the air column. What is the name of the phenomenon taking place when this happens? Why does the sound become the loudest?


What do you understand by free vibrations of a body? Draw a displacement-time graph to represent them. Given one example.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×