मराठी

State the Conditions for the Flow of Charge in a Circuit from One Point to the Other.

Advertisements
Advertisements

प्रश्न

State the conditions for the flow of charge in a circuit from one point to the other.

टीपा लिहा
Advertisements

उत्तर

The main condition for the flow of charge between two points is the difference in their potentials. If the potential difference is greater, a strong current flows and if both points are at the same potential, no current will flow.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?

संबंधित प्रश्‍न

Draw the electrical symbols of the following components and state its use:

Rheostat (variable resistance)


Three resistors are connected as shown in the diagram.


Through the resistor 5 ohm, a current of 1 ampere is flowing.

(i) What is the current through the other two resistors?
(ii) What is the p.d. across AB and across AC?
(iii) What is the total resistance


The lamps in a house hold circuit are connected in parallel because:

(a) this way they required less current
(b) if one lamp fails the others remain lit
(c) this way they require less power
(d) if one lamp fails the other also fail


What is the purpose of a switch in a circuit? Why is the switch put in the live wire?

An electric bulb is rated 250 W, 230 V. What information does this convey? Calculate the current through a 60 W lamp rated for 250 V. If the line voltage falls to 200 V, how is the power consumed by the bulb affected?

An electric bulb is rated at 220 V, 100 W. What is its resistance? What maximum current can be passed through it?

Two cells each having an e.m.f. of 2 V and an internal resistance of 2Ω are
connected (a) In series, and ( b) In para 1le l as shown in fig. . What is the
current flowing through the cir cu it in each_ case?


Three heaters each rated 250 W, 100 V are connected in parallel to a 100 V supply. The resistance of each heater


What should I choose ___________________

a. for decreasing resistance in a circuit.
(Resistors in series / Resistors in parallel)

b. for getting protection from electric current.
(Nickel / Ebonite)

c. to measure the current in the circuit?
(Ammeter/ Voltmeter) 

Problems for practice:

If 3A current flows through a circuit, then convert the current in terms of a milliampere.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×