मराठी

On Which Conservation Principle Is Kirchoff'S Second Law of Electrical Networks Based? - Physics (Theory)

Advertisements
Advertisements

प्रश्न

On which conservation principle is Kirchoff's Second Law of electrical networks based?

टीपा लिहा
Advertisements

उत्तर

Kirchoff's Second Law state about law of conservation of energy. 

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
2016-2017 (March)

APPEARS IN

व्हिडिओ ट्यूटोरियलVIEW ALL [2]

संबंधित प्रश्‍न

Determine the current drawn from a 12 V supply with internal resistance 0.5 Ω by the infinite network shown in the figure. Each resistor has 1 Ω resistance.


Find the equivalent resistances of the networks shown in the figure between the points a and b.


An infinite ladder is constructed with 1 Ω and 2 Ω resistors, as shown in the figure. (a) Find the effective resistance between the points A and B. (b) Find the current that passes through the 2 Ω resistor nearest to the battery.


A capacitor of capacitance 8.0 μF is connected to a battery of emf 6.0 V through a resistance of 24 Ω. Find the current in the circuit (a) just after the connections are made and (b) one time constant after the connections are made.


State Kirchhoff ’s voltage rule.


State and explain Kirchhoff’s rules.


Lightning is a very good example of a natural current. In typical lightning, there is 109 J energy transfer across the potential difference of 5 × 107 V during a time interval of 0.2 s. Using this information, estimate the following quantities:

  1. the total amount of charge transferred between cloud and ground
  2. the current in the lightning bolt
  3. the power delivered in 0.2 s.


Three resistors having resistances r1, r2 and r3 are connected as shown in the given circuit. The ratio `i_3/i_1` of currents in terms of resistances used in the circuit is:


Three resistors having resistances r1,  r2 and r3 are connected as shown in the given circuit. The ratio `"i"_3/"i"_1` of currents in terms of resistances used in the circuit is :


What is the advantage of using thick metallic strips to join wires in a potentiometer?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×