Advertisements
Advertisements
प्रश्न
Match the column
| Column A | Column B |
| (a) Camel | (1) broad and deep foundation |
| (b) Truck | (2) broad feet |
| (c) Knife | (3) six or eight tyres |
| (d) High building | (4) sharp cutting edge |
| (e) Thrust | (5) atm |
| (f) Moment of force | (6) N |
| (g) Atmospheric pressure | (7) N m |
Advertisements
उत्तर
| Column A | Column B |
| (a) Camel | broad feet |
| (b) Truck | six or eight tyres |
| (c) Knife | sharp cutting edge |
| (d) High building | broad and deep foundation |
| (e) Thrust | N |
| (f) Moment of force | N m |
| (g) Atmospheric pressure | atm |
APPEARS IN
संबंधित प्रश्न
An effort is applied on the bigger wheel of a gear having 32 teeth. It is used to turn a wheel of 8 teeth. Where it is used.
Sleepers are used below the rails.
Find the moment of force of 20 N about an axis of rotation at distance 0.5 m from the force.
Calculate the acceleration produced in a body of mass 50 g when acted upon by a force of 20 N.
State two factor on which moment of force about a point depends.
A body is acted upon by two forces of magnitude F but in opposite directions. State the effect of the force if both forces act at the same point of the body.
A nut is opened by a wrench of length 10 cm. if the least force required is 5.0 N. find the moment of force needed to turn the nut.
A meter scale is provided at 10 cm mark and is balanced by suspending 400 g from 0 cm mark (fig.). Calculate the mass of meter scale.
State two factors affecting the turning effect of a force.
Clockwise moment produced by a force about a fulcrum is considered to be ______.
