Advertisements
Advertisements
प्रश्न
If the mechanical advantage of the handle of the pump plunger is 8, calculate the force applied at the end of the handle of the pump plunger.
Advertisements
उत्तर
Mechanical advantage = 8
But mechanical advantage = `"L"/"E"`
Here, L = 2 Kgf
Force applied at the handle of pump plunger = E =?
⇒ M.A. = `"L"/"E"`
8 = `2/"E"`
E = `2/8=1/4`
= 0.25 kgf.
APPEARS IN
संबंधित प्रश्न
State Pascal's law of transmission of pressure.
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
The areas of pistons in a hydraulic machine are 5 cm2 and 625 cm2. What force on the smaller piston will support a load of 1250 N on the larger piston? State any assumption which you make in your calculation.
Select the correct option.
The pressure exerted by 50 kg (g = 10 m/s−2) on an area of cross-section of 2 m2 is
P is the pressure at some point in a liquid. State whether pressure P is a scalar or vector quantity.
What are the factors on which the pressure of a liquid depends?
Pascal’s law is used in
Assertion: Pascal’s law is the working principle of a hydraulic lift.
Reason: Pressure is thrust per unit area.
Match the following:
| 1. | Hydraulic press | a. | Archimedes |
| 2. | Cartesian Diver | b. | Floatation |
| 3. | Hydrostatic Balance | c. | Pascal’s law |
| 4. | Hydrometer | d. | Buoyancy |
A hydraulic press can lift 100 kg when a mass 'm' is placed on the smaller piston. It can lift ______ kg when the diameter of the larger piston is increased by 4 times and that of the smaller piston is decreased by 4 times keeping the same mass 'm' on the smaller piston.
