Advertisements
Advertisements
प्रश्न
If the mechanical advantage of the handle of the pump plunger is 8, calculate the force applied at the end of the handle of the pump plunger.
Advertisements
उत्तर
Mechanical advantage = 8
But mechanical advantage = `"L"/"E"`
Here, L = 2 Kgf
Force applied at the handle of pump plunger = E =?
⇒ M.A. = `"L"/"E"`
8 = `2/"E"`
E = `2/8=1/4`
= 0.25 kgf.
APPEARS IN
संबंधित प्रश्न
A piece of wood is floating in water kept in a bottle. The bottle is connected to an air pump. Neglect the compressibility of water. When more air is pushed into the bottle from the pump, the piece of wood will float with
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
The areas of pistons in a hydraulic machine are 5 cm2 and 625 cm2. What force on the smaller piston will support a load of 1250 N on the larger piston? State any assumption which you make in your calculation.
At a given place, a barometer records 70 cm of Hg. If the mercury in the barometer is replaced by water, what would be resulting in reading? (Density of Hg = 13600 kg/m3; Density of water = 1000 kg/m3)
The pressure in the water pipe on the ground floor of a building is 40000 pascals, whereas on the first floor it’s 10000 pascals. Find the height of the first floor. (Acceleration due to gravity g = 10 ms−2)
Define the SI unit of pressure.
Name three applications of Pascal's law.
State and explain Pascal's law of transmission of pressure.
Pascal’s law is used in
Analogy
Pascal’s law: ______:: Surface tensin: ______.
