मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

If → a = 2 → I + 3 → J + 4 → K and → B = 4 → I + 3 → J + 2 → K Find → a × → B .

Advertisements
Advertisements

प्रश्न

If  \[\vec{A} = 2 \vec{i} + 3 \vec{j} + 4 \vec{k} \text { and } \vec{B} = 4 \vec{i} + 3 \vec{j} + 2 \vec{k}\] find \[\vec{A} \times \vec{B}\].

थोडक्यात उत्तर
Advertisements

उत्तर

Given: 

\[\vec{A} = 2 \hat {i} + 3 \hat {j} + 4 \hat {k}\] and

\[\vec{B} = 4 \hat {i} + 3 \hat {j} + 2 \hat {k} \]

The vector product of \[\vec{A} \times \vec{B}\]

can be obtained as follows:

\[\vec{A} \times \vec{B} = \begin{vmatrix}\hat {i} & \hat {j} & \hat {k} \\ 2 & 3 & 4 \\ 4 & 3 & 2\end{vmatrix}\]

\[ = \hat {i} \left( 6 - 12 \right) - \hat {j} \left( 4 - 16 \right) + \hat {k} \left( 6 - 12 \right)\]

\[ = - 6 \hat {i} + 12 \hat {j} - 6 \hat {k}\]

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 2: Physics and Mathematics - Exercise [पृष्ठ २९]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
पाठ 2 Physics and Mathematics
Exercise | Q 15 | पृष्ठ २९

संबंधित प्रश्‍न

“Every great physical theory starts as a heresy and ends as a dogma”. Give some examples from the history of science of the validity of this incisive remark


If two quantities have same dimensions, do they represent same physical content?


Suggest a way to measure the thickness of a sheet of paper.


A unitless quantity


The dimensions ML−1 T−2 may correspond to


Find the dimensions of electric field E. 

The relevant equations are \[F = qE, F = qvB, \text{ and }B = \frac{\mu_0 I}{2 \pi a};\]
where F is force, q is charge, v is speed, I is current, and a is distance.


Find the dimensions of the coefficient of linear expansion α and


The height of mercury column in a barometer in a Calcutta laboratory was recorded to be 75 cm. Calculate this pressure in SI and CGS units using the following data : Specific gravity of mercury = \[13 \cdot 6\] , Density of \[\text{ water} = {10}^3 kg/ m^3 , g = 9 \cdot 8 m/ s^2\] at Calcutta. Pressure
= hpg in usual symbols.


Test if the following equation is dimensionally correct:
\[v = \frac{1}{2 \pi}\sqrt{\frac{mgl}{I}};\] 
where h = height, S = surface tension, \[\rho\] = density, P = pressure, V = volume, \[\eta =\] coefficient of viscosity, v = frequency and I = moment of interia.


Is it possible to add two vectors of unequal magnitudes and get zero? Is it possible to add three vectors of equal magnitudes and get zero?


Is the vector sum of the unit vectors  \[\vec{i}\] and \[\vec{i}\] a unit vector? If no, can you multiply this sum by a scalar number to get a unit vector?

 


If \[\vec{A} \times \vec{B} = 0\] can you say that

(a) \[\vec{A} = \vec{B} ,\]

(b) \[\vec{A} \neq \vec{B}\] ?


A vector \[\vec{A}\] points vertically upward and \[\vec{B}\] points towards the north. The vector product \[\vec{A} \times \vec{B}\] is


The radius of a circle is stated as 2.12 cm. Its area should be written as


Let \[\vec{C} = \vec{A} + \vec{B}\]


The x-component of the resultant of several vectors
(a) is equal to the sum of the x-components of the vectors of the vectors
(b) may be smaller than the sum of the magnitudes of the vectors
(c) may be greater than the sum of the magnitudes of the vectors
(d) may be equal to the sum of the magnitudes of the vectors.


The magnitude of the vector product of two vectors \[\left| \vec{A} \right|\] and \[\left| \vec{B} \right|\] may be

(a) greater than AB
(b) equal to AB
(c) less than AB
(d) equal to zero.


A carrom board (4 ft × 4 ft square) has the queen at the centre. The queen, hit by the striker moves to the from edge, rebounds and goes in the hole behind the striking line. Find the magnitude of displacement of the queen (a) from the centre to the front edge, (b) from the front edge to the hole and (c) from the centre to the hole.


Round the following numbers to 2 significant digits.
(a) 3472, (b) 84.16. (c)2.55 and (d) 28.5


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×