Advertisements
Advertisements
प्रश्न
How much heat will an instrument of 12 W produce in one minute if it is connected to the heat produced by it?
Advertisements
उत्तर
Given: Power rating (P) = 12 W
Time interval (t) = 1 minute = 60 s (1 minute = 60 seconds)
Potential difference (V) = 12 V
Heat = I2Rt
But, we know that P = I2R
Therefore, H = P x t = 12 W x 60 s = 720 joules
APPEARS IN
संबंधित प्रश्न
An electric heater of resistance 8 Ω draws 15 A from the service mains 2 hours. Calculate the rate at which heat is developed in the heater.
Why is the tungsten used almost exclusively for filament of electric lamps?
Why does the connecting cord of an electric heater not glow hot while the heating element does?
What is meant by the heating effect of current? Give two applications of the heating effect of current.
The electrical resistivities of four materials P, Q, R and S are given below:
| P | `6.84xx10^8`Ωm |
| Q | `1.70xx10^8`Ωm |
| R | ` 1.0xx10^15`Ωm |
| s | `11.0xx10^-7`Ωm |
Which material will you use for making: (a) heating element of electric iron (b) connecting wires of electric iron (c) covering of connecting wires? Give reason for your choice in each case.
Identify the figure and give its use.
Statement 1 : Electric current ( flow of electrons ) creates heat in the resistor.
Statement 2 : Heat in the resistor is created according to the rule of energy conservation.
Explain Statement 1 with the help of Statement 2.
Statement 1 : Electric current ( flow of electrons ) creates heat in the resistor.
Statement 2 : Heat in the resistor is created according to the rule of energy conservation.
Explain Statement 1 with the help of Statement 2.
Mark the correct choice
- Assertion: Electric appliances with a metallic body have three wire connections.
- Reason: Three-pin connections reduce the heating of the connecting wires.
An electric iron consumes energy at the rate of 420 W when heating is at the maximum rate and 180 W when heating is at the minimum rate. The applied voltage is 220 V. What is the current in each case?
What is Joule’s heating effect? How can it be demonstrated experimentally? List its four applications in daily life.
When a switch is in OFF position,
- circuit starting from the positive terminal of the cell stops at the switch.
- circuit is open.
- no current flows through it.
- current flows after some time.
Choose the combination of correct answer from the following.
Can we use the same fuse in a geyser and a television set? Explain.
Name two electric devices for each where
- heating effect of current is used and
- magnetic effect of current is used.
Explain the working of an electric fuse.
Copper wire offers very little ______ and does not get heated up quickly.
Define the following:
Electrolyte
Tara, after completing her exams, went to her grandmother's house along with her younger brother Rahul. One day, Rahul came home after playing and switched on the fan and air conditioner. At the same time, his grandmother was preparing a milkshake for him using a mixer. Suddenly, they heard a big sound and the electricity of the house got shut down. Tara is called an electrician. He said the main reason for supply to shut down was overloading.
- What is overloading?
- Is overloading and short the same? When does short-circuiting take place?
- How can the effects of overloading be avoided?
In a set up the students coated iron nails with zinc metal and noted that, iron nails coated with zinc prevents rusting. They also observed that zinc initially acts as a physical barrier, but an extra advantage of using zinc is that it continues to prevent rusting even if the layer of zinc is damaged. Name this process of rust prevention and give any two other methods to prevent rusting.
The graph of voltage vs current for four different materials is shown below.
Which of these four materials would be used for making filament of bulb?
