Advertisements
Advertisements
प्रश्न
Advertisements
उत्तर
APPEARS IN
संबंधित प्रश्न
Name the two scales of a vernier callipers and explain how it is used to measure length correct up to 0.01 cm.
Describe in steps, how would you use a vernier callipers to measure the length of a small rod?
While measuring the length of a rod with a vernier callipers, below shows the position of its scales. What is the length of the rod?
Why is the metre length in terms of the wavelength of light considered more accurate?
The thimble of a screw gauge has 50 divisions for one rotation. The spindle advances 1 mm when the screw is turned through two rotations.
- What is the pitch of the screw?
- What is the least count of screw gauge?
- When the screw gauge is used to measure the diameter of wire the reading on the sleeve is found to be 0.5 mm and reading on thimble is found, 27 divisions. What is the diameter of the wire in centimetres?
What do you understand by the term least count of screw?
What is the backlash error?
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
Thickness of a cricket ball is measured by ______.
