मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान 2nd PUC Class 12

Can the instantaneous power output of an ac source ever be negative? Can the average power output be negative?

Advertisements
Advertisements

प्रश्न

Can the instantaneous power output of an ac source ever be negative? Can the average power output be negative?

टीपा लिहा
Advertisements

उत्तर

Let the applied e.m.f  E = E0 sin (ωt)

I = I0 sin (ωt – `phi)`

Instantaneous power output of ac source

P = EI

= E0 sin ωtI0 sin(ωt – `phi`)

= E0I0 sin ωt [sin ωt cos `phi` – cos ωt sin `phi`]

= E0I0 [sin2 ωt cos `phi` – sin ωt cos ωt sin `phi`]

= E0I0 `[((1 - cos 2ωt))/2 cos phi - 1/2 sin 2ωt sin phi]`

= `(E_0I_0)/2 [cos phi - cos  2ωt cos phi - sin 2ωt sin phi]`

= `(E_0I_0)/2 [cos phi - (cos 2ωt cos phi + sin 2ωt sin phi]`

P = `(E_0I_0)/2 [cos phi - cos(2ωt - phi)]`

Taken phase angle `phi`, ± ve.

Instantaneous Power P = `(E_0I_0)/2 [cos phi +- cos (2ωt - phi)]` as cos `phi = R/Z`, R and Z can never be negative and value of `cos phi(phi = 2ωt +- phi)` can vary from (1 to 0 to – 1) in any case P can never ne negative.

We know that average power of LCR series ac circuit is Pav = `(E_0I_0)/2 cos phi`

Again as `cos phi = R/Z` is always positive, because R and Z, the reactances are always positive.

So Pav can never be negative.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 7: Alternating Current - MCQ I [पृष्ठ ४३]

APPEARS IN

एनसीईआरटी एक्झांप्लर Physics Exemplar [English] Class 12
पाठ 7 Alternating Current
MCQ I | Q 7.17 | पृष्ठ ४३

संबंधित प्रश्‍न

An alternative voltage given by V = 140 sin 314t is connected across a pure resistor of 50 Ω. Find

  1. The frequency of the source.
  2. The rms current is through the resistor.

A 100 Ω resistor is connected to a 220 V, 50 Hz ac supply.

  1. What is the rms value of current in the circuit?
  2. What is the net power consumed over a full cycle?

A 100 Ω resistor is connected to a 220 V, 50 Hz ac supply.

What is the net power consumed over a full cycle?


If Vm and Im are peak voltage and current, impedance Z in an AC circuit is ______.


For minimum dissipation of energy in the circuit the power factor should be ______.

The alternating current in a circuit is described by the graph shown in figure. Show rms current in this graph.


If the reading of the voltmeter V1 is 40 V, then the reading of voltmeter V2 is ______.


The standard household supply in India is 220 V. This value refers to ______.


The average power dissipated in a resistor when an AC current of peak value im flows through it is ______.


Using \[P_{\mathrm{loss}}=I^{2}R\], what reduces energy losses during transmission?


Which advantage do AC generators have over DC sources at a large scale?


In a pure resistor AC circuit, how are the AC voltage source and resistor \[R\] connected?


In \[v=v_m\sin\omega t\], what does \[\omega\] represent?


What does Kirchhoff's Voltage Law give when the only element connected to the AC voltage source is resistor \[R\]?


What physical effect makes an RMS value an equivalent “effective” value?


Which notation identifies the RMS values of voltage and current?


A light bulb is rated at \[100\,\mathrm{W}\] on a \[220\,\mathrm{V}\] AC supply. What is its resistance?


What is the peak voltage of a \[220\,\mathrm{V}\] AC supply?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×