Advertisements
Advertisements
प्रश्न
A U-shaped wire is placed before a concave mirror having radius of curvature 20 cm as shown in figure. Find the total length of the image.
Advertisements
उत्तर
Given,
Radius of curvature of concave mirror, R = 20 cm
So its focal length will be f = \[\frac{R}{2}\] = −10 cm
For part AB of the U shaped wire, PB = 30 + 10 = 40 cm
Therefore, u = −40 cm
Using mirror formula,
`1\v = -1/10 - 1/-40 =-3/40`
⇒ `V = -40/3 = 13. 3 cm`
So , PB' = 13.3 cm
`m = (A' B')/( AB ) = -( v )/ u`
\[= \frac{- ( - 13 . 3)}{- 40} = - \frac{1}{3}\]
\[ \Rightarrow A'B' = - \frac{10}{3} = - 3 . 33 \text{ cm }\]
For part CD of the U shaped wire, PC = 30 cm
Therefore, u = −30 cm
Again, using mirror equation:
`1/V = -1/10 - 1/-30`
`1/V = -1/10 + 1/-30 = -1/15`
⇒ v = −15 cm = PC'
\[m = \frac{C'D'}{CD} = - \frac{v}{u}\]
`= -( -15 )/ -30 = -1/2`
⇒ C'D' = 5 cm
⇒ B'C' = PC' − PB'
= 15 − 13.3 = 1.7 cm
Hence, the total length of the U- shaped wire is A'B' + B'C' + C'D'
= (3.3) + (1.7) + 5 = 10 cm
APPEARS IN
संबंधित प्रश्न
In motor vehicles, a convex mirror is attached near the driver's seat to give him the view of the traffic behind. What is the special function of this convex mirror which a plane mirror can not do?
In image formation from spherical mirrors, only paraxial rays are considered because they
A man uses a concave mirror for shaving. He keeps his face at a distance of 25 cm from the mirror and gets an image which is 1.4 times enlarged. Find the focal length of the mirror.
Light is incident from glass (μ = 1.5) to air. Sketch the variation of the angle of deviation δ with the angle of incident i for 0 < i < 90°.
A narrow pencil of parallel light is incident normally on a solid transparent sphere of radius r. What should be the refractive index is the pencil is to be focussed (a) at the surface of the sphere, (b) at the centre of the sphere.
A diverging lens of focal length 20 cm and a converging mirror of focal length 10 cm are placed coaxially at a separation of 5 cm. Where should an object be placed so that a real image is formed at the object itself?
Consider the situation shown in figure. The elevator is going up with an acceleration of 2.00 m s−2 and the focal length of the mirror is 12.0 cm. All the surfaces are smooth and the pulley is light. The mass-pulley system is released from rest (with respect to the elevator) at t = 0 when the distance of B from the mirror is 42.0 cm. Find the distance between the image of the block B and the mirror at t = 0.200 s. Take g = 10 m s−2.
State how the focal length of a glass lens (Refractive Index 1.5) changes when it is completely immersed in:
(i) Water (Refractive Index 1.33)
(ii) A liquid (Refractive Index 1.65)
Answer the following question.
Three lenses of focal length +10 cm, —10 cm and +30 cm are arranged coaxially as in the figure given below. Find the position of the final image formed by the combination.
Focal length of a mirror is given by ______.
According to the mirror equation, ______.
A parallel beam of light ray parallel to the x-axis is incident on a parabolic reflecting surface x = 2by2 as shown in the figure. After reflecting it passes through focal point F. What is the focal length of the reflecting surface?
The radius of curvature of the curved surface of a plano-convex lens is 20 cm. If the refractive index of the material of the lens be 1.5, it will ______.
A thin convex lens of focal length 25 cm is cut into two pieces 0.5 cm above the principal axis. The top part is placed at (0, 0) and an object placed at (– 50 cm, 0). Find the coordinates of the image.
An object is 20 cm away from a concave mirror and it is within the focal length of the mirror. If the mirror is changed to a plane mirror, the image moves 15 cm closer to the mirror.
Focal length of the concave mirror is ______.
A particle is dropped along the axis from a height 15 cm on a concave mirror of focal length 30 cm as shown in figure. The acceleration due to gravity is 10 m/s2. Find the maximum speed of image in m/s:
A lens of focal length f is divided into two equal parts and then these parts are put in a combination as shown in the figure below.
- What is the focal length of L1?
- What is the focal length of the final combination?
