Advertisements
Advertisements
प्रश्न
A torch bulb is rated at 3 V and 600 mA. Calculate it’s
- power
- resistance
- energy consumed if it is used for 4 hours.
Advertisements
उत्तर
- V = 3V and I = 600 mA = 600 × 10-3 A
(a) Power (P) = VI
= 3 × 600 × 10-3
= 1800 × 10-3
= 1.8 W (or) watt. - Resistance (R) =
\(\frac{\mathrm{V}}{\mathrm{I}}\) = \(\frac{3}{600 \times 10^{-3}}\) = 5 Ω. - Power (P) = 1.8 W and
Time = 4 hours = 4 × 60 × 60 = 14400 second
Energy consumed E = P × t = 1.8 × 14400 = 25920 joules
E = 25.9 KJ.
APPEARS IN
संबंधित प्रश्न
1 kWh = ________ J
Which quantity has the unit of watt?
When an electric lamp is connected to 12 V battery, it draws a current of 0.5 A. The power of the lamp is:
(a) 0.5 W
(b) 6 W
(c) 12 W
(d) 24 W
Why is an electric light bulb not filled with air? Explain why argon or nitrogen is filled in an electric bulb.
State the S.I. units of electrical power and electrical energy.
(i) Define the household unit of electricity.
(ii) What is the voltage of the electricity that is generally supplied to a house?
Household wiring for lamp connections can either be done in parallel or in series.Which one would you prefer? Give a reason for your answer.
Why does not the heating coil produce any visible light? in an electric stove.
A bulb is connected to a battery of e.m.f. 6V and internal resistance 2Ω A steady current of 0.5A flows through the bulb. Calculate the heat energy dissipated in the bulb in 10 minutes.
A bulb is marked 100W, 220V and an electric heater is marked 2000 W, 220 V.
(i) What is the ratio between the resistances of these two devices?
(ii) How does the power-voltage rating of a device help us to decide about the type of leads (connecting wires) to be used for it?
(iii) In which of the above two devices, a thicker connecting wire of lead is required?
A cooler of 1500 W, 200 volts and a fan of 500 W, 200 volts are to be used from a household supply. The rating of fuse to be used is:
