Advertisements
Advertisements
प्रश्न
A converging lens of focal length 15 cm and a converging mirror of focal length 10 cm are placed 50 cm apart. If a pin of length 2.0 cm is placed 30 cm from the lens farther away from the mirror, where will the final image form and what will be the size of the final image?
Advertisements
उत्तर
Given,
Convex lens of focal length fl = 15 cm
Concave mirror of focal length fm = 10 cm
Distance between mirror and lens = 50 cm
Length of the pin (object length) h0 = 2.0 cm
As per the question
The pin (object) is placed at a distance of 30 cm from the lens on the principle axis.
Using lens formula,
\[\frac{1}{v} - \frac{1}{u} = \frac{1}{f_l}\]
\[ \Rightarrow v = \frac{u f_l}{u + f_l}\]
Since, u = −30 cm and fl = 15 cm
\[So, v = \frac{( - 30) \times 15}{( - 30 + 15)}=\frac{- 450}{- 15}=cm\]
From the figure it can be seen that image of the object (AB) is real and inverted (A'B') and it is of the same size as the object. This image (A'B') is at a distance of 20 cm from the concave mirror, which is formed at the centre of curvature of the mirror. Thus, mirror will form the image (A'B') at the same place as (A''B'') and will be of the same size. Now, due to the refraction from the lens, the final image (A''B'') will be formed at AB and will be of the same size as the object (AB).
APPEARS IN
संबंधित प्रश्न
A convex lens has a focal length of 10 cm. Find the location and nature of the image if a point object is placed on the principal axis at a distance of (a) 9.8 cm, (b) 10.2 cm from the lens.
An extended object is placed at a distance of 5.0 cm from a convex lens of focal length 8.0 cm. (a) Draw the ray diagram (to the scale) to locate the image and from this, measure the distance of the image from the lens. (b) Find the position of the image from the lens formula and see how close the drawing is to the correct result.
A converging lens of focal length 15 cm and a converging mirror of focal length 10 cm are placed 50 cm apart with common principal axis. A point source is placed in between the lens and the mirror at a distance of 40 cm from the lens. Find the locations of the two images formed.
A 5 mm high pin is placed at a distance of 15 cm from a convex lens of focal length 10 cm. A second lens of focal length 5 cm is placed 40 cm from the first lens and 55 cm from the pin. Find (a) the position of the final image, (b) its nature and (c) its size.
A ball is kept at a height h above the surface of a heavy transparent sphere made of a material of refractive index μ. The radius of the sphere is R. At t = 0, the ball is dropped to fall normally on the sphere. Find the speed of the image formed as a function of time for \[t < \sqrt{\frac{2h}{g}}\] . Consider only the image by a single refraction.
Use the above relation to obtain the condition on the position of the object and the radius of curvature in terms of n1and n2 when the real image is formed.
According to new Cartesian sign conventions, all the distances are measured from the ______.
A spherical surface of radius R separates two medium of refractive indices µ1 and µ2, as shown in figure. Where should an object be placed in the medium 1 so that a real image is formed in medium 2 at the same distance?
What is a spherical refracting surface?
According to the Cartesian sign convention for refraction at a spherical surface, all distances are measured from:
In the Cartesian sign convention, distances measured in the direction of incident light are taken as:
When light goes from a rarer to a denser medium at a spherical surface, the refracted ray:
Which ray is considered in the first step of the derivation for refraction at a spherical surface?
Which set of variables is primarily involved in refraction at a spherical surface, as opposed to refraction at a plane surface?
Which effect is common for image shift in refraction at a plane surface?
In the geometrical setup for refraction at a spherical surface, the centre of curvature, object distance, image distance, and radius of curvature are denoted respectively by:
