Science (English Medium) कक्षा १२ - CBSE Question Bank Solutions for Physics

What is the advantage of using thick metallic strips to join wires in a potentiometer?

Why are alloys used for making standard resistance coils?

Power P is to be delivered to a device via transmission cables having resistance RC. If V is the voltage across R and I the current through it, find the power wasted and how can it be reduced.

The circuit in figure shows two cells connected in opposition to each other. Cell E₁ is of emf 6V and internal resistance 2Ω; the cell E₂ is of emf 4V and internal resistance 8Ω. Find the potential difference between the points A and B.

Two cells of voltage 10V and 2V and internal resistances 10Ω and 5Ω respectively, are connected in parallel with the positive end of 10V battery connected to negative pole of 2V battery (Figure). Find the effective voltage and effective resistance of the combination.

A rectangular conducting loop consists of two wires on two opposite sides of length l joined together by rods of length d. The wires are each of the same material but with cross-sections differing by a factor of 2. The thicker wire has a resistance R and the rods are of low resistance, which in turn are connected to a constant voltage source V₀. The loop is placed in uniform a magnetic field B at 45° to its plane. Find τ, the torque exerted by the magnetic field on the loop about an axis through the centres of rods.

Consider a light beam incident from air to a glass slab at Brewster’s angle as shown in figure. A polaroid is placed in the path of the emergent ray at point P and rotated about an axis passing through the centre and perpendicular to the plane of the polaroid.

Can reflection result in plane polarised light if the light is incident on the interface from the side with higher refractive index?

For the same objective, find the ratio of the least separation between two points to be distinguished by a microscope for light of 5000 Å and electrons accelerated through 100 V used as the illuminating substance.

Figure shown a two slit arrangement with a source which emits unpolarised light. P is a polariser with axis whose direction is not given. If I₀ is the intensity of the principal maxima when no polariser is present, calculate in the present case, the intensity of the principal maxima as well as of the first minima.

To ensure almost 100 per cent transmissivity, photographic lenses are often coated with a thin layer of dielectric material. The refractive index of this material is intermediated between that of air and glass (which makes the optical element of the lens). A typically used dielectric film is MgF₂ (n = 1.38). What should the thickness of the film be so that at the center of the visible spectrum (5500 Å) there is maximum transmission.

A particle is dropped from a height H. The de Broglie wavelength of the particle as a function of height is proportional to ______.

A proton, a neutron, an electron and an α-particle have same energy. Then their de Broglie wavelengths compare as ______.

An electron is moving with an initial velocity `v = v_0hati` and is in a magnetic field `B = B_0hatj`. Then it’s de Broglie wavelength ______.

An electron (mass m) with an initial velocity `v = v_0hati (v_0 > 0)` is in an electric field `E = - E_0hati `(E₀ = constant > 0). It’s de Broglie wavelength at time t is given by ______.

An electron (mass m) with an initial velocity `v = v_0hati` is in an electric field `E = E_0hatj`. If λ₀ = h/mv₀, it’s de Broglie wavelength at time t is given by ______.

Relativistic corrections become necessary when the expression for the kinetic energy `1/2 mv^2`, becomes comparable with mc², where m is the mass of the particle. At what de Broglie wavelength will relativistic corrections become important for an electron?

1. λ = 10 nm
2. λ = 10^–1 nm
3. λ = 10^–4 nm
4. λ = 10^–6 nm

Two particles A₁ sand A₂ of masses m₁, m₂ (m₁ > m₂) have the same de Broglie wavelength. Then ______.

1. their momenta are the same.
2. their energies are the same.
3. energy of A₁ is less than the energy of A₂.
4. energy of A₁ is more than the energy of A₂.

The de Broglie wavelength of a photon is twice the de Broglie wavelength of an electron. The speed of the electron is `v_e = c/100`. Then ______.

1. `E_e/E_p = 10^-4`
2. `E_e/E_p = 10^-2`
3. `p_e/(m_ec) = 10^-2`
4. `p_e/(m_ec) = 10^-4`

A particle moves in a closed orbit around the origin, due to a force which is directed towards the origin. The de Broglie wavelength of the particle varies cyclically between two values λ₁, λ₂ with λ₁ > λ₂. Which of the following statement are true?

1. The particle could be moving in a circular orbit with origin as centre.
2. The particle could be moving in an elliptic orbit with origin as its focus.
3. When the de Broglie wavelength is λ₁, the particle is nearer the origin than when its value is λ₂.
4. When the de Broglie wavelength is λ₂, the particle is nearer the origin than when its value is λ₁.