Advertisements
Advertisements
प्रश्न
Write the condition required for a circuit to be a closed circuit.
Advertisements
उत्तर
For an electric circuit to be closed, every part of it must be made of conductors.
APPEARS IN
संबंधित प्रश्न
Draw circuit symbols for
fixed resistance
Draw circuit symbols for
an open switch
What is a circuit diagram
How does the short circuit form? What is its effect?
In an electric circuit, a battery and a bulb have been connected and the battery consists of two cells of equal potential difference. If the bulb is not glowing, then which tests will you perform in order to find out the reason for the bulb not glowing?
Higher Order Question
A student made a circuit by using an electric cell, a switch, a torch bulb (fitted in the bulb holder), and copper connecting wires. When he turned on the switch, the torch bulb did not glow at all. The student checked the circuit and found that all the wire connections were tight.
- What could be the possible reason for the torch bulb not glowing even when the circuit appears to be complete?
Study the three electric circuits below. Each of them has a glass rod (G), a steel rod (S), and a wooden rod (W).
In which of the electric circuits would the bulb not light up.
Three bulbs A, B, C are connected in a circuit as shown in the following figure. When the switch is ‘ON’
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
Overloading of electric circuits can lead to short-circuiting.
