Advertisements
Advertisements
प्रश्न
What is a lever?
Advertisements
उत्तर
A lever is a rigid rod that may be bent or straight and rotates around a point; it is known as a FULCRUM.
APPEARS IN
संबंधित प्रश्न
Which class of lever will always have MA > 1 and why?
Name a machine to obtain gain in speed ?
Write down a relation expressing the mechanical advantage of a lever.
A 4 m long rod of negligible weight is to be balanced about a point 125 cm from one end and a load of 18 kgf is suspended at a point 60 cm from the support on the shorter arm.
- If a weight W is placed at a distance of 250 cm from the support on the longer arm to balance the rod, find W.
- If a weight 5 kgf is kept to balance the rod, find its position.
- To which class of lever does it belong?
A man uses a crowbar of length 1.5 m to raise a load of 75 kgf by putting a sharp edge below the bar at a distance 1 m from his hand.
- Draw a diagram of the arrangement showing the fulcrum (F), load (L) and effort (E) with their directions.
- State the kind of lever.
- Calculate:
- load arm,
- effort arm,
- mechanical advantage and
- the effort needed.
Give three examples for leavers of 1st order.
The following belong to which class of lever?
Fore-arm
In the diagram shown alongside a claw hammer, mark the fulcrum (F) and indicate the directions of load (L) and effort (E) with arrows. What class of lever is it? Give one more example of this class of lever.
What is a lever?
The length of a nut-cracker is 12 cm. A nut, when kept at a distance of 4 cm from its fulcrum, requires an effort of 100 gf to crack it. What force will be required to crack the nut without using the nut-cracker?
