हिंदी
तमिलनाडु बोर्ड ऑफ सेकेंडरी एज्युकेशनएसएसएलसी (अंग्रेजी माध्यम) कक्षा ८

The property of _______ of a liquid surface enables the water droplets to move upward in plants.

Advertisements
Advertisements

प्रश्न

The property of _______ of a liquid surface enables the water droplets to move upward in plants.

रिक्त स्थान भरें
Advertisements

उत्तर

The property of surface tension of a liquid surface enables the water droplets to move upward in plants.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 2: Force and Pressure - Exercises [पृष्ठ १९]

APPEARS IN

सामाचीर कलवी Science [English] Class 8 TN Board
अध्याय 2 Force and Pressure
Exercises | Q II. 3. | पृष्ठ १९

संबंधित प्रश्न

A raindrop of diameter 4 mm is about to fall on the ground. Calculate the pressure inside the raindrop. [Surface tension of water T = 0.072 N/m, atmospheric pressure = 1.013 x 105 N/m2 ]


Explain why Water on a clean glass surface tends to spread out while mercury on the same surface tends to form drops. (Put differently, water wets glass while mercury does not.)


Calculate the work done in increasing the radius of a soap bubble in air from 1 cm to 2 cm. The surface tension of soap solution is 30 dyne/cm. (Π = 3.142).


The contact angle between pure water and pure silver is 90°. If a capillary tube made of silver is dipped at one end in pure water, will the water rise in the capillary?


If water in one flask and castor oil in other are violently shaken and kept on a table, which will come to rest earlier?


The contact angle between a solid and a liquid is a property of

(a) the material of the solid
(b) the material of the liquid
(c) the shape of the solid
(d) the mass of the solid


Insect moves over the surface of water because of ______.


Water rises in a capillary tube of radius r upto a height h. The mass of water in a capillary is m. The mass of water that will rise in a capillary of radius `"r"/4` will be ______.


The surface tension of a soap solution is T. The work done in blowing a soap bubble of diameter d to that of a diameter 2d is ______.


Two blocks of masses m and M are connected by means of a metal wire of cross-sectional area A passing over a frictionless fixed pully as shown in the figure. The system is then released. If M = 2m, then the stress produced in the wire is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×