Advertisements
Advertisements
प्रश्न
The magnetic field at a point, 10 cm away from a magnetic dipole, is found to be `2.0 xx 10^-4 "T"` . Find the magnetic moment of the dipole if the point is (a) in end-on position of the dipole and (b) in broadside-on position of the dipole.
Advertisements
उत्तर
Given:
Magnetic field strength, B = `2 xx 10^-4 "T"`
Distance of the point from the dipole, d = 10 cm = 0.1 m
(a) If the point is at the end-on position:
The magnetic field (B) on the axial point of the dipole is given by B = `u_0/(4pi) (2M)/d^3`
Here , M is the magnetic moment of the dipole that we need to find out .
`therefore` `2 xx 10^-4 = (10^-7 xx 2M)/(10^-1)^3`
⇒ `M = (2 xx 10^-4 xx 10^-3)/(10^-7 xx 2)`
⇒ `M = 1 A - "m"^2`
(b) If the point is at broadside-on position (equatorial position):
The magnetic field (B) is given by
B = `u_0/(4pi) M/d^3`
⇒ `2 xx 10^-4 = (10^-7 xx M)/(10^-1)^3`
⇒ `M = 2A - "m"^2`
APPEARS IN
संबंधित प्रश्न
State how magnetic susceptibility is different for the three types of magnetic materials, i.e. diamagnetic, paramagnetic and ferromagnetic materials
What are permanent magnets? Give one example ?
Why is the core of an electromagnet made of ferromagnetic materials?
Compare the direction of the magnetic field inside a solenoid with that of the field there if the solenoid is replaced by its equivalent combination of north pole and south pole.
A dip circle is taken to geomagnetic equator. The needle is allowed to move in a vertical plane perpendicular to the magnetic meridian. The needle will stay ______.
If the current is doubled, the deflection is also doubled in
If the earth's magnetic field has a magnitude 3.4 × 10−5 T at the magnetic equator of the earth, what would be its value at the earth's geomagnetic poles?
The magnetic field due to the earth has a horizontal component of 26 μT at a place where the dip is 60°. Find the vertical component and the magnitude of the field.
The needle of a dip circle shows an apparent dip of 45° in a particular position and 53° when the circle is rotated through 90°. Find the true dip.
Soft iron is used to make the core of the transformer because of its ______.
A thin diamagnetic rod is placed vertically between the poles of an electromagnet. When the current in the electromagnet is switched on, then the diamagnetic rod is pushed up, out of the horizontal magnetic field. Hence the rod gains gravitational potential energy. The work required to do this comes from ______.
In a permanent magnet at room temperature ______.
A wire of length 2 m carrier of lamp is bend to form a circle. The magnetic moment of a coil is :-
Which of the following is most suitable for the core of an electromagnet?
