Advertisements
Advertisements
प्रश्न
The diagram below shows a magnetic kept just below the conductor AB which is kept in North South direction.
(i) In which direction will the needle deflect when the key is closed ?
(ii) Why is the deflection produced ?
(iii) What will be the change in the deflection if the magnetic needle is taken just above the conductor AB ?
(iv) Name one device which works on this principle.
Advertisements
उत्तर
(i) Eest direction
(ii) The needle align itself with the direction of magnetic field lines. Since the lines are perpendicular to the direction of current, the needle will try to allign that way also.
(iii) The northpole of the compass needle deflects towards West.
(iv) Electric motor
APPEARS IN
संबंधित प्रश्न
Which of the following is likely to be the correct wattage for an electric iron used in our homes?
(a) 60 W
(b) 250 W
(c) 850 W
(d) 2000 W
Write an expression for the electrical power spent in flow of current through a conductor in terms of
(a) Resistance and potential difference, (b) current and resistance.
Distinguish between kilowatt and kilowatt-hour.
The coil of an electric bulb takes 40 watts to start glowing. If more than 40 W are supplied, 60% of the extra power is converted into light and the remaining into heat. The bulb consumes 100 W at 220 V. Find the percentage drop in the light intensity at a point if the supply voltage changes from 220 V to 200 V.
The diagram above shows a circuit with the key k open. Calculate :
(i) the resistance of the circuit when the key k is open.
(ii) the current drawn from the cell when the key k is open.
(iii) the resistance of the circuit when the key k is closed.
(iv) the current drawn from the cell when the key k is closed.
How does the heat produced by die passage of current in a metallic wire depend on the time of passage of current in the wire?
1 kWh is equal to:
If a heater coil rated lkW, 220 V is connected in series with an electric bulb of 100 W, 220 V and are supplied 200V, power consumed by the bulb in this circuit is ______.
A conductor of 10 Ω is connected across a 6 V ideal source. The power supplied by the source to the conductor is ______.
