Advertisements
Advertisements
प्रश्न
The 300 turn primary of a transformer has resistance 0.82 Ω and the resistance of its secondary of 1200 turns is 6.2 Ω. Find the voltage across the primary if the power output from the secondary at 1600V is 32 kW. Calculate the power losses in both coils when the transformer efficiency is 80%
Advertisements
उत्तर
Given data:
NP = 300, NS = 1200, VS = 1600 V, RP = 0.82Ω,
RS = 6.2Ω, PS = 32 KW
1) PS = VSIS
`"I"_"S" = "P"_"S"/"V"_"S"`
`= 32000/1600`
IS = 20 A
2) `"V"_"P"/"V"_"S" = "N"_"P"/"N"_"S"`
`"V"_"P" = 300/1200 xx 1600`
= 400 V
3) η = `"P"_"S"/("V"_"p""I"_"p")`
`= 80/100 = 32000/(400 xx "I"_"p") = 32000/320`
Ip = 100 A
4) Power loss in primary = (IP)2 × RP
= 100 × 1000 × 0.82
= 0.82 × 1000
= 8.2000 = 8.2 KW
5) Power loss in secondary = (IS)2 × RS
= 20 × 20 × 6.2
= 400 × 6.2
= 2480 W = 2.48 KW
APPEARS IN
संबंधित प्रश्न
A group of students while coming from the school noticed a box marked "Danger H.T. 2200 V" at a substation in the main street. They did not understand the utility of a such a high voltage, while they argued, the supply was only 220 V. They asked their teacher this question the next day. The teacher thought it to be an important question and therefore explained to the whole class.
Answer the following questions:
(i) What device is used to bring the high voltage down to low voltage of a.c. current and what is the principle of its working ?
(ii) Is it possible to use this device for bringing down the high dc voltage to the low voltage? Explain
(iii) Write the values displayed by the students and the teacher.
Explain the significance of Lenz’s law to show the conservation of energy in electromagnetic induction.
What is a transformer? On what principle does it work?
What is Transformer?
Explain the construction of transformer.
A 200V/120V step-down transformer of 90% efficiency is connected to an induction stove of resistance 40 Ω. Find the current drawn by the primary of the transformer.
A transformer is essentially an a.c. device. It cannot work on d.c. It changes alternating voltages or currents. It does not affect the frequency of a.c. It is based on the phenomenon of mutual induction. A transformer essentially consists of two coils of insulated copper wire having different numbers of turns and wound on the same soft iron core.
The number of turns in the primary and secondary coils of an ideal transformer is 2000 and 50 respectively. The primary coil is connected to a main supply of 120 V and secondary coil is connected to a bulb of resistance 0.6 Ω.
The value of current in the bulb is ______.
Two coils P and Q are kept near each other. When no current flows through coil P and current increase in coil Q at the rate 10A/s, the emf in coil P is 15mV. When coil Q carries no current and current of 1. 8A flows through coil P, the magnetic flux linked with the coil Q is ______.
The self-inductance of a closely wound coil of 200 turns is 10 mH. Determine the value of magnetic flux through the cross-section of the coil when the current passing through the coil is 4 mA.
A 12 V, 60 W lamp is connected to 220 V AC via an ideal transformer. Find the primary current.
