हिंदी

It would cost a man Rs. 3.50 to buy 1.0 kW h of electrical energy from the Main Electricity Board. His generator has a maximum power of 2.0 kW. - Science

Advertisements
Advertisements

प्रश्न

It would cost a man Rs. 3.50 to buy 1.0 kW h of electrical energy from the Main Electricity Board. His generator has a maximum power of 2.0 kW. The generator produces energy at this maximum power for 3 hours. Calculate how much it would cost to buy the same amount of energy from the Main Electricity Board.

संक्षेप में उत्तर
Advertisements

उत्तर

E = P × T

So, E = 3 × 2

E = 6 kWh

Cost of buying electricity from the main electricity board = 6 × 3.50 = Rs. 21.0

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2021-2022 (March) Term 2 Sample

वीडियो ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्न

Why is the tungsten used almost exclusively for filament of electric lamps?


Find the odd one out and give its explanation.


Write scientific reason.

A coil made up of alloy Nichrome is used in the electric heater cooker as a resistor.


Name some devices that run using heat effect of electric current


When a switch is in OFF position,

  1. circuit starting from the positive terminal of the cell stops at the switch.
  2. circuit is open.
  3. no current flows through it.
  4. current flows after some time. 

Choose the combination of correct answer from the following.


Fuse is a strip of alloy wire which is made up of lead and tin with a very low ______.


Match the following

1. Bulb a. Conductor
2. Electroplating b.

Insulator

3. Pure water c.  Heating effect of current
4. Salt solution d. Chemical effect of current

In the electric equipment producing heat like iron, electric heater, boiler, toaster etc., an alloy such as nichrome is used, not pure metals.


In a set up the students coated iron nails with zinc metal and noted that, iron nails coated with zinc prevents rusting. They also observed that zinc initially acts as a physical barrier, but an extra advantage of using zinc is that it continues to prevent rusting even if the layer of zinc is damaged. Name this process of rust prevention and give any two other methods to prevent rusting.


Write an expression for the amount of heat produced in a resistor when an electric current is passed through it stating the meanings of the symbols used.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×