Advertisements
Advertisements
प्रश्न
In which of the following applications of Iron, rusting will occur most? Support your answer with valid reason.
| A | B | C | D |
 |
 |
 |
 |
विकल्प
A - Iron Bucket electroplated with Zinc
B - Electricity cables having iron wires covered with aluminium
C - Iron hinges on a gate
D - Painted iron fence
Advertisements
उत्तर
C - Iron hinges on a gate
Iron is in contact with both atmospheric oxygen and moisture/ water vapour.
APPEARS IN
संबंधित प्रश्न
When current is switched ‘on’ in a room heater, it ______.
An electric heater is connected to the 230 V mains supply. A current of 8 A flows through the heater.
(a) How much charge flows around the circuit each second?
Give a scientific reason.
Tungsten metal is used to make a solenoid type coil in an electric bulb.
Solve the following example.
Two tungsten bulbs of wattage 100 W and 60 W power work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?
What does overloading cause?
Name any two appliances which work under the principle of heating effect of current.
When a switch is in OFF position,
- circuit starting from the positive terminal of the cell stops at the switch.
- circuit is open.
- no current flows through it.
- current flows after some time.
Choose the combination of correct answer from the following.
Your teacher has shown you the following activity.
Activity: Teacher has wound a long insulated piece of wire around an iron nail in the form of a coil. Free ends of the wire are connected to a cell through a switch as shown in the following figure. The current is switched on and some pins are placed near the ends of the nail.
Write down any three questions that come to your mind about this activity.
Define the following:
Electrolyte
An electric iron is rated 220 V, 2 kW. If the iron is used for 3h daily find the cost of running it for one week if it costs ₹ 4.25 per kWh.
