हिंदी

Give SI unit of resistivity.

Advertisements
Advertisements

प्रश्न

Give SI unit of resistivity.

State resistivity of S.I unit.

अति संक्षिप्त उत्तर
Advertisements

उत्तर

The SI unit of resistivity is Ω m.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 5: Electrochemistry - Very short answer questions

APPEARS IN

लखमीर सिंग Physics Part 1 [English] Class 10
अध्याय 4 Electricity
Exercise 4 | Q 24. (b) | पृष्ठ २१५
लखमीर सिंग Physics [English] Class 10 ICSE
अध्याय 8 Current Electricity
EXERCISE | Q 15. 2. | पृष्ठ २०८

संबंधित प्रश्न

The molar conductivity of 0.05 M BaCl2 solution at 25° C is 223Ω-1 cm2 mol-1. What is its conductivity?


Choose the most correct option.

Two solutions have the ratio of their concentrations 0.4 and ratio of their conductivities 0.216. The ratio of their molar conductivities will be ______.


What is a cell constant? What are its units? How is it determined experimentally?


Kohlrausch law is applicable for the solution _______.


Write an equation that shows the relationship between molar conductivity and degree of dissociation of weak electrolyte.


Write three important steps required to determine molar conductivity.


Write relation between electrolytic conductivity and molar conductivity.


Molar conductance of BaCl2, H2SO4 and HCl at infinite dilution are X1, X2 and X3 respectively. Molar conductance of BaSO4 at infinite dilution is ____________.


For the reaction \[\ce{A -> B}\], the rate increases by a factor of 2.25 when the concentration of A is increased by 1.5. What is the order of the reaction?


The conductivity of 0.02 M solution of NaCl is 2.6 × 10−2 S cm−1. What is its molar conductivity?


Which among the following solution has the highest conductivity (k) value?


Conductivity of KCI solution is 0.0027 Ω−1 m−1 at 25°C. The resistance of the solution is 82.4 Ω. The cell constant is ____________ m−1.


The molar conductivities at infinite dilution for sodium acetate, HCI and NaCl are 91 S cm2 mol-1, 425.9 S cm2 mol-1 and 126.4 S cm2 mol-1 respectively. The molar conductivity of acetic acid at infinite dilution is ______.


The resistance of a conductivity cell containing 0.001 M KCl solution at 298 K is 1500 Ω. What is the cell constant if conductivity of 0.001 M KCI solution at 298 K is 0.146 × 10−3 S cm−1?


In 2 hours, a certain current liberates 0.504 g hydrogen. How many grams of copper can be deposited by the same current flowing for the same time in a CuSO4 solution?

(Molar mass of Cu = 63.5 g mol−1, H2 = 2.0 g mol−1)


Which of the following graph represents the variation of `∧` with `sqrt"c"` for acetic acid solution?


What is the cell constant of `"N"/10 "KCl"` solution at 25°C, if conductivity and resistance of a solution is 0.0112 Ω−1 cm−1 and 55.0 Ω respectively?


What is the relation between cell constant, conductivity and electrical resistance?


The distance between electrodes of a conductivity cell is 0.98 cm and area of cross section is 1.96 cm2. What is the cell constant?


Conductivity of a conductor is ____________.


If the conductivity of 0.08 M KCl solution is 2 × 10-2 Ω-1, what is the molar conductivity of the solution?


A conductivity cell dipped in 0.5 M KCl gives a resistance of 250 ohms. If the conductivity of KC I solution is 6.68 × 10-3 S cm-1, what is the cell constant?


Molar conductivities at infinite dilution of Mg2+ and Br- are 105.8 Ω-1 cm2 mol-1 and 78.2 Ω-1 cm2 mol-1 respectively. Calculate molar conductivity at zero concentration of MgBr2.


A conductivity cell filled with 0.02 M AgNO3 gives at 25°C resistance of 947 ohms. If the cell constant is 2.3 cm-1, what is the molar conductivity of 0.02 M AgNO3 at 25°C?


Explain the determination of molar conductivity of a weak electrolyte at infinite dilution or zero concentration using Kohlrausch's law.


Specific conductance of 0.1 M HNO3 is 6.3 × 10−2 ohm−1 cm−1. The molar conductance of the solution is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×