हिंदी

Find the Charge on the Capacitor as Shown in the Circuit.

Advertisements
Advertisements

प्रश्न

Find the charge on the capacitor as shown in the circuit.

Advertisements

उत्तर

Total current I through the circuit is given by

\[I = \frac{V}{R}\]
Here, V = 2 V
= (10+20) Ω = 30 Ω
\[\therefore I = \frac{2}{30} = \frac{1}{15} A\]
Voltage across 10 Ω resistor =\[I(10) = \frac{10}{15} = \frac{2}{3} V\]
∴ Charge on the capacitor is given by \[Q = CV = \left( 6 \times {10}^{- 6} \right)\left( \frac{2}{3} \right) = 4  \mu C\]
shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2013-2014 (March) Foreign Set 1

वीडियो ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्न

A 12 pF capacitor is connected to a 50 V battery. How much electrostatic energy is stored in the capacitor?


Find the charge on the capacitor shown in the figure.


Two capacitors of capacitances 4⋅0 µF and 6⋅0 µF are connected in series with a battery of 20 V. Find the energy supplied by the battery.


A capacitor of capacitance 100 μF is connected across a battery of emf 6 V through a resistance of 20 kΩ for 4 s. The battery is then replaced by a thick wire. What will be the charge on the capacitor 4 s after the battery is disconnected?


Consider the situation shown in figure. The switch is closed at t = 0 when the capacitors are uncharged. Find the charge on the capacitor C1 as a function of time t.


A capacitor of capacitance C is given a charge Q. At t = 0, it is connected to an ideal battery of emf ε through a resistance R. Find the charge on the capacitor at time t.


An air-filled parallel plate capacitor has a uniform electric field `overset(->)("E")` in the space between the plates. If the distance between the plates is 'd' and the area of each plate is 'A', the energy stored in the capacitor is ______ 
(∈0 = permittivity of free space)


A 2µF capacitor is charge to 100 volt and then its plate are connected by a conducting wire. The heat produced is:-


Electrostatic energy of 4 x 10−4 J is stored in a charged 25 pF capacitor. Find the charge on the capacitor.


In a capacitor of capacitance 20 µF, the distance between the plates is 2 mm. If a dielectric slab of width 1 mm and dielectric constant 2 is inserted between the plates, what is the new capacitance?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×