Advertisements
Advertisements
प्रश्न
Advertisements
उत्तर
When one complete rotation is given to the screw hand, it moves forward or backward by a distance is called the pitch of the screw. It is a distance between two consecutive threads of the screw.
Pitch of the screw = distance traveled by screw-in n rotations/n rotations
APPEARS IN
संबंधित प्रश्न
The size of bacteria is 1 µ. Find the number of bacteria present in 1 m length.
Define the least count of vernier callipers. How do you determine it?
Name the instrument which has the least count
0.1 mm
Fig., below shows the reading obtained while measuring the diameter of a wire with a screw gauge. The screw advances by 1 division on the main scale when circular head is rotated once.
Find:
(i) Pitch of the screw gauge,
(ii) Least count of the screw gauge and
(iii) The diameter of the wire.
Which part of vernier callipers is used to measure the external diameter of a cylinder?
The thimble of a screw gauge has 50 divisions for one rotation. The spindle advances 1 mm when the screw is turned through two rotations.
- What is the pitch of the screw?
- What is the least count of screw gauge?
- When the screw gauge is used to measure the diameter of wire the reading on the sleeve is found to be 0.5 mm and reading on thimble is found, 27 divisions. What is the diameter of the wire in centimetres?
What do you understand by the following term as applied to micrometre screw gauge?
Sleeve scale
What do you understand by the following term as applied to micrometre screw gauge?
Baseline
What is the least count in the case of the following instrument?
Spring balance
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
