Advertisements
Advertisements
प्रश्न
Define assignable cause
Advertisements
उत्तर
The second type of variation which is present in any production process is due to non-random causes.
The assignable causes may occur in at any stage of the process, right from the arrival of the raw materials to the final delivery of the product.
Some of the important factors of assignable causes are defective raw materials, fault in machines, unskilled manpower, worn-out tools, new operation, etc.
APPEARS IN
संबंधित प्रश्न
Define chance cause
What do you mean by process control?
Name the control charts for variables
Define the mean chart
Write the control limits for the R chart
In a certain bottling industry the quality control inspector recorded the weight of each of the 5 bottles selected at random during each hour of four hours in the morning.
| Time | Weight in ml | ||||
| 8:00 AM | 43 | 41 | 42 | 43 | 41 |
| 9:00 AM | 40 | 39 | 40 | 39 | 44 |
| 10:00 AM | 42 | 42 | 43 | 38 | 40 |
| 11:00 AM | 39 | 43 | 40 | 39 | 42 |
Choose the correct alternative:
The quantities that can be numerically measured can be plotted on a
Choose the correct alternative:
`bar"X"` chart is a
Choose the correct alternative:
R is calculated using
The following data gives the average life(in hours) and range of 12 samples of 5lamps each. The data are
| Sample No | 1 | 2 | 3 | 4 | 5 | 6 |
| Sample Mean | 1080 | 1390 | 1460 | 1380 | 1230 | 1370 |
| Sample Range | 410 | 670 | 180 | 320 | 690 | 450 |
| Sample No | 7 | 8 | 9 | 10 | 11 | 12 |
| Sample Mean | 1310 | 1630 | 1580 | 1510 | 1270 | 1200 |
| Sample Range | 380 | 350 | 270 | 660 | 440 | 310 |
Construct control charts for mean and range. Comment on the control limits.
