Advertisements
Advertisements
प्रश्न
Classify the following into good conductors, resistors and insulators:
Rubber, Mercury, Nichrome, Polythene, Aluminium, Wood, Manganin, Bakelite, Iron, Paper, Thermocol, Metal coin
Advertisements
उत्तर
Conductors: mercury, aluminium, iron and metal coin
Resistors: nichrome and manganin
Insulators: rubber, polythene, wood, paper, thermocol and bakelite
APPEARS IN
संबंधित प्रश्न
On what factors does the resistance of a conductor depend?
Two conducting wires of the same material and of equal lengths and equal diameters are first connected in series and then parallel in a circuit across the same potential difference. The ratio of heat produced in series and parallel combinations would be:
List the factors on which the resistance of a conductor in the shape of a wire depends.
Fill in the following blanks with suitable words:
Copper is a good .......... Plastic is an ..........
Distinguish between good conductors, resistors and insulators. Name two good conductors, two resistance and two insulators.
What is meant by the "resistance of a conductor" ? Write the relation between resistance, potential difference and current.
What happens to the resistance as the conductor is made thinner?
Name the electrical property of a material whose symbol is "omega".
Which among iron and mercury is a better conductor of electricity?
Which has more resistance:
a long piece of nichrome wire or a short one?
Which has more resistance:
a thick piece of nichrome wire or a thin piece?
Give two examples of substances which are good conductors of electricity. Why do you think they are good conductors of electricity?
Calculate the resistance of a copper wire 1.0 km long and 0.50 mm diameter if the resistivity of copper is 1.7 × 10−8 Ω m.
What would be the effect on the resistance of a metal wire of:
increasing its length?
What would be the effect on the resistance of a metal wire of:
increasing its temperature?
Use the data in the Table given below to answer the following –
Which material is the best conductor?
Table give below Electrical resistivity of some substances at 20°C
| Electrical resistivity of some substances at 20°C | ||
| − | Material | Resistivity (Ω m) |
| Conductors |
Silver | 1.60 × 10−8 |
| Copper | 1.62 × 10−8 | |
| Aluminium | 2.63 × 10−8 | |
| Tungsten | 5.20 × 10−8 | |
| Nickel | 6.84 × 10−8 | |
| Iron | 10.0 × 10−8 | |
| Chromium | 12.9 × 10−8 | |
| Mercury | 94.0 × 10−8 | |
| Manganese | 1.84 × 10−6 | |
| Alloys |
Constantan (alloy of Cu and Ni) |
49 × 10−6 |
| Manganin (alloy of Cu, Mn and Ni) |
44 × 10−6 | |
| Nichrome (alloy of Ni, Cr, Mn and Fe) |
100 × 10−6 | |
| Insulators | Glass | 1010 − 1014 |
| Hard rubber | 1013 − 1016 | |
| Ebonite | 1015 − 1017 | |
| Diamond | 1012 − 1013 | |
| Paper (dry) | 1012 | |
How will you infer with the help of an experiment that the same current flows through every part of the circuit containing three resistances in series connected to a battery?
How will the resistance of a wire be affected if its
- length is doubled, and
- radius is also doubled ?
Give justification for your answer.
