हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान 2nd PUC Class 12

Calculate the mass of urea (NH2CONH2) required in making 2.5 kg of 0.25 molal aqueous solution.

Advertisements
Advertisements

प्रश्न

Calculate the mass of urea (NH2CONH2) required in making 2.5 kg of 0.25 molal aqueous solution.

संख्यात्मक
Advertisements

उत्तर

Given: Moles of urea = 0.25 mol

Mass of solvent (water) = 1 kg = 1000 g

Molar mass of urea (NH2CONH2) = 2(1 × 14 + 2 × 1) + 1 × 12 + 1 × 16

= 60 g mol−1

∴ Mass of urea in 1000 g of water = 0.25 mol × 60 g mol−1

= 15 g

Total mass of solution = 1000 + 15 g

= 1015 g

= 1.015 kg

Thus, 1.015 kg of solution contains urea = 15 g

∴ 2.5 kg of solution will require urea = `(15  "g")/(1.015  "kg") xx 2.5  "kg"`

= 36.95 g

= 37 g (approximately)

Hence, the mass of urea required is 37 g.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 1: Solutions - Intext Questions [पृष्ठ ५]

APPEARS IN

एनसीईआरटी Chemistry Part 1 and 2 [English] Class 12
अध्याय 1 Solutions
Intext Questions | Q 1.4 | पृष्ठ ५

संबंधित प्रश्न

Calculate the mole fraction of benzene in solution containing 30% by mass in carbon tetrachloride.


An antifreeze solution is prepared from 222.6 g of ethylene glycol (C2H6O2) and 200 g of water. Calculate the molality of the solution. If the density of the solution is 1.072 g mL−1, then what shall be the molarity of the solution?


A sample of drinking water was found to be severely contaminated with chloroform (CHCl3) supposed to be a carcinogen. The level of contamination was 15 ppm (by mass):

  1. express this in percent by mass.
  2. determine the molality of chloroform in the water sample.

Nalorphene (C19H21NO3), similar to morphine, is used to combat withdrawal symptoms in narcotic users. Dose of nalorphene generally given is 1.5 mg. Calculate the mass of 1.5 × 10−3 m aqueous solution required for the above dose.


When KOH solution is added to potassium dichromate solution the colour of solution
changes to yellow, because _______

(A) chromate ion changes to dichromate ion

(B) dichromate ion changes to chromate ion

(C) oxidation number of chromium changes from + 6 to + 4

(D) oxidation number of chromium changes from + 4 to +6


The sum of all mole fraction for a mixture is always equal to ____________.


The molarity of the solution containing 7.1 g of Na2SO4 in 100 ml of aqueous solution is ____________.


2.5 litres of NaCl solution contain 5 moles of the solute. What is the molarity?


5 ml of N HCl, 20 ml of N/2 H2SO4 and 30 ml of N/3 HNO3 are mixed together and volume made to one litre. The normality of the resulting solution is:


What is the normality of a 1 M solution of H3PO4?


The volume of 4 N HCl and 10 N HCl required to make 1 litre of 6 N HCl are ____________.


200 ml of water is added to 500 ml of 0.2 M solution. What is the molarity of this diluted solution?


Which of the following units is useful in relating concentration of solution with its vapour pressure?


Which of the following concentration unit is independent of temperature?


Cone. H2SO4 is 98% H2SO4 by mass has d = 1.84 g cm−3. Volume of acid required to make one litre of 0.1 M H2SO4 is:


What is the mole fraction of solute in 1.00 m aqueous solutions?


Define the following modes of expressing the concentration of a solution. Which of these modes are independent of temperature and why?

ppm. (parts per million)


Define the following modes of expressing the concentration of a solution. Which of these modes are independent of temperature and why?

x (mole fraction)


What is the normality of 0.3 m H3Pcl solution?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×