Advertisements
Advertisements
प्रश्न
A toroid of 4000 turns has an outer radius of 26 cm and an inner radius of 25 cm. If the current in the wire is 10 A. Calculate the magnetic field of the toroid.
Advertisements
उत्तर
Given:
R1 = 0.25 m;
R2 = 0.26 m;
N = 4000;
i = 10 A
To find: Magnetic field of the toroid (B)
Formula:
B = `mu_0 xx N/l xx i`
where l = mean length of toroid = `2pi((R_1 + R"_2))/2`
Calculation:
From formula,
l = π (R1 + R2)
= π (0.25 + 0.26)
= π × 0.51 m
∴ B = `((4pi xx 10^-7) xx 4000 xx 10)/(pi xx 0.51)`
= `16/0.51 xx 10^-3`
∴ Bin = 3.137 × 10−2 T
The magnetic field of the toroid is 3.137 × 10−2 T.
APPEARS IN
संबंधित प्रश्न
A solenoid of length π m and 5 cm in diameter has winding of 1000 turns and carries a current of 5 A. Calculate the magnetic field at its center along the axis.
What is Toroid?
A solenoid of length 50 cm of the inner radius of 1 cm and is made up of 500 turns of copper wire for a current of 5 A in it. What will be the magnitude of the magnetic field inside the solenoid?
A solenoid of length π m and 5 cm in diameter has a winding of 1000 turns and carries a current of 5 A. Calculate the magnetic field at its centre along the radius.
A winding wire which is used to frame a solenoid can bear a maximum of 20 A current. If the length of the solenoid is 80 cm and its cross-sectional radius is 3 cm, then the required length of winding wire is ______ (B = 0.2 T)
A toroid has a core (non-ferromagnetic) of inner radius 25 cm and outer radius 26 cm, around which 2,000 turns of a wire are wound. If the current in the wire is 10 A, the magnetic field inside the core of the toroid will be ______
Two current-carrying coils have radii r and 4r and have same magnetic induction at their centres. The ratio of voltage applied across them is ______.
Two toroids 1 and 2 have total number of turns 400 and 200 respectively with average radii 40 cm and 20 cm respectively. If they carry same current I, the ratio of the magnetic fields along the two loops is, ____________.
A 600 turn coil of effective area 0.05 m2 is kept perpendicular to a magnetic field 4 x 10-5 T. When the plane of the coil is rotated by 90° around any of its coplanar axis in 0.1 s, the e.m.f. induced in the coil will be: ____________.
The magnetic induction along the axis of a toroidal solenoid is independent of ______.
A proton is projected with a uniform velocity 'v' along the axis of a current carrying solenoid, then ____________.
The space within a current carrying toroid is filled with a m metal of susceptibility 16.5 x 10-6. The percentage increase in the magnetic field B is ____________.
Magnetic induction due to a toroid does not depend upon ______.
A toroid is a long coil of wire wound over a circular core. If 'r' and 'R' are the radii of the coil and toroid respectively, the coefficient of self-induction of the toroid is (The magnetic field in it is uniform and R > > r) ____________.
(N = number of turns of the coil and µ0 = permeability of free space)
The magnetic flux near the axis and inside the air core solenoid of length 60 cm carrying current 'I' is 1.57 × 10-6 Wb. Its magnetic moment will be ______.
(cross-sectional area is very small as compared to length of solenoid, µ0 = 4π × 10-7 SI unit)
A long solenoid carrying current 'I1' produces magnetic field 'B1' along its axis. If the current is reduced to 25% and number of turns per cm are increased four times, then new magnetic field 'B2' is ____________.
A winding wire is used to prepare a solenoid that can bear a maximum current of 10A. If the length of a solenoid is 80 cm and its cross-sectional radius is 3 cm, the required length of winding wire is ____________.
(magnetic field B = 0.2 T, µ0 = 4 x 10-7 SI units)
A charged particle carrying a charge 'q' and moving with velocity V, enters into a solenoid carrying a current T, along its axis. If 'B' is the magnetic induction along the axis of a solenoid, then the force 'F' acting on the charged particle will be ____________.
A toroid has a core of inner radius 20 cm and outer radius 22 cm around which 4200 turns of a wire are wound. If the current in the wire is 10 A. What is the magnetic field inside the core of toroid?
Obtain an expression for magnetic induction of a toroid of ‘N’ turns about an axis passing through its centre and perpendicular to its plane.
A current of 10 A passes through a coil having 5 turns and produces magnetic field at the centre of the coil having magnitude 0.5 x 10-4 T. Calculate diameter of the coil.
(µ0 = 4π x 10-7 Wb/Am)
