हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान कक्षा ११

A Circular Coil of One Turn of Radius 5.0 Cm is Rotated About a Diameter with a Constant Angular Speed of 80 Revolutions per Minute.

Advertisements
Advertisements

प्रश्न

A circular coil of one turn of radius 5.0 cm is rotated about a diameter with a constant angular speed of 80 revolutions per minute. A uniform magnetic field B = 0.010 T exists in a direction perpendicular to the axis of rotation. Suppose the ends of the coil are connected to a resistance of 100 Ω. Neglecting the resistance of the coil, find the heat produced in the circuit in one minute.

योग
Advertisements

उत्तर

Given:-

T = 1 minute

Heat produced in the circuit is calculated using the following relation:-

\[H = \int\limits_0^T i^2 Rdt\]

\[\Rightarrow H =  \int\limits_0^{1  \min} \frac{B^2 A^2 \omega^2}{R^2}\sin\left( \omega t \right)Rdt\]

\[= \frac{B^2 A^2 \omega^2}{2R} . \int\limits_0^{1 \min} \left( 1 - \cos 2\omega t \right)dt\]

\[ = \frac{B^2 A^2 \omega^2}{2R} \left( 1 - \frac{\sin2\omega t}{2\omega} \right)_0^{1 \min} \]

\[ = \frac{B^2 A^2 \omega^2}{2R}\left( 60 - \frac{\sin 2 \times 80 \times 2\pi/60 \times 60}{2 \times 80 \times 2\pi/60} \right)\]

\[ = \frac{60}{2R} \times \pi^2 r^4 \times B^2 \times \left( 80 \times \frac{2\pi}{60} \right)^2 \]

\[ = \frac{60}{200} \times 10 \times \frac{64}{9} \times 10 \times 625 \times {10}^{- 8} \times {10}^{- 4} \]

\[ = \frac{625 \times 6 \times 64}{9 \times 2} \times {10}^{- 11} = 1 . 33 \times {10}^{- 7} J\]

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 38: Electromagnetic Induction - Exercises [पृष्ठ ३०८]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
अध्याय 38 Electromagnetic Induction
Exercises | Q 25 | पृष्ठ ३०८

संबंधित प्रश्न

Obtain an expression for the energy stored in a solenoid of self-inductance ‘L’ when the current through it grows from zero to ‘I’.


Derive the expression for the magnetic field due to a solenoid of length ‘2l’, radius ‘a’ having ’n’ number of turns per unit length and carrying a steady current ‘I’ at a point
on the axial line, distance ‘r’ from the centre of the solenoid. How does this expression compare with the axial magnetic field due to a bar magnet of magnetic moment ‘m’?


Use this law to obtain the expression for the magnetic field inside an air cored toroid of average radius 'r', having 'n' turns per unit length and carrying a steady current I.


An observer to the left of a solenoid of N turns each of cross section area 'A' observes that a steady current I in it flows in the clockwise direction. Depict the magnetic field lines due to the solenoid specifying its polarity and show that it acts as a bar magnet of magnetic moment m = NIA.

 


Derive an expression for the mutual inductance of two long co-axial solenoids of same length wound one over the other,


Define the term self-inductance of a solenoid.


A closely wound solenoid 80 cm long has 5 layers of windings of 400 turns each. The diameter of the solenoid is 1.8 cm. If the current carried is 8.0 A, estimate the magnitude of B inside the solenoid near its centre.


Define self-inductance of a coil.


A wire AB is carrying a steady current of 6 A and is lying on the table. Another wire CD carrying 4 A is held directly above AB at a height of 1 mm. Find the mass per unit length of the wire CD so that it remains suspended at its position when left free. Give the direction of the current flowing in CD with respect to that in AB. [Take the value of g = 10 ms−2]


 Draw and compare the pattern of the magnetic field lines in the two cases ?


The magnetic field inside a tightly wound, long solenoid is B = µ0 ni. It suggests that the field does not depend on the total length of the solenoid, and hence if we add more loops at the ends of a solenoid the field should not increase. Explain qualitatively why the extra-added loops do not have a considerable effect on the field inside the solenoid.  


A long solenoid of radius 2 cm has 100 turns/cm and carries a current of 5 A. A coil of radius 1 cm having 100 turns and a total resistance of 20 Ω is placed inside the solenoid coaxially. The coil is connected to a galvanometer. If the current in the solenoid is reversed in direction, find the charge flown through the galvanometer.


A long solenoid is fabricated by closely winding a wire of radius 0.5 mm over a cylindrical nonmagnetic frame so that the successive turns nearly touch each other. What would be the magnetic field B at the centre of the solenoid if it carries a current of 5 A? 


A tightly-wound solenoid of radius a and length l has n turns per unit length. It carries an electric current i. Consider a length dx of the solenoid at a distance x from one end. This contains n dx turns and may be approximated as a circular current i n dx. (a) Write the magnetic field at the centre of the solenoid due to this circular current. Integrate this expression under proper limits to find the magnetic field at the centre of the solenoid. (b) verify that if l >> a, the field tends to B = µ0ni and if a >> l, the field tends to `B =(mu_0nil)/(2a)` . Interpret these results.


A tightly-wound, long solenoid is kept with its axis parallel to a large metal sheet carrying a surface current. The surface current through a width dl of the sheet is Kdl and the number of turns per unit length of the solenoid is n. The magnetic field near the centre of the solenoid is found to be zero. (a) Find the current in the solenoid. (b) If the solenoid is rotated to make its axis perpendicular to the metal sheet, what would be the magnitude of the magnetic field near its centre? 


A capacitor of capacitance 100 µF is connected to a battery of 20 volts for a long time and then disconnected from it. It is now connected across a long solenoid having 4000 turns per metre. It is found that the potential difference across the capacitor drops to 90% of its maximum value in 2.0 seconds. Estimate the average magnetic field produced at the centre of the solenoid during this period. 


The length of a solenoid is 0.4 m and the number turns in it is 500. A current of 3 amp, is flowing in it. In a small coil of radius 0.01 m and number of turns 10, a current of 0.4 amp. is flowing. The torque necessary to keep the axis of this coil perpendicular to the axis of solenoid will be ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×