मराठी

Which of the following metals is used in electroplating to make objects appear shining?

Advertisements
Advertisements

प्रश्न

Which of the following metals is used in electroplating to make objects appear shining?

पर्याय

  • Iron

  • Copper

  • Chromium

  • Aluminium

MCQ
Advertisements

उत्तर

Chromium

Explanation:

Chromium is used for electroplating to make objects appear shining because chromium has a shiny appearance and it resists scratches.

shaalaa.com
Effects of Electric Current - Chemical Effects of Electric Current
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 14: Chemical Effects of Electric Current - Multiple Choice Questions [पृष्ठ ७८]

APPEARS IN

एनसीईआरटी एक्झांप्लर Science [English] Class 8
पाठ 14 Chemical Effects of Electric Current
Multiple Choice Questions | Q 6. | पृष्ठ ७८

संबंधित प्रश्‍न

If you pass current through copper sulphate solution, copper gets deposited on the plate connected to the ______ terminal of the battery.


The process that you saw in the image is used for the purification of copper. A thin plate of pure copper and a thick rod of impure copper are used as electrodes. Copper from impure rod is sought to be transferred to the thin copper plate. Which electrode should be attached to the positive terminal of the battery and why?


In an electrolyte the current is due to the flow of ______.


An electric current can produce


Boojho and Paheli performed experiments taking similar bulbs and cells but two different solutions A and B as shown in the following figure.

Boojho's Experiment Paheli's Experiment
(A) (B) 

They found that the bulb in the setup A glows more brightly as compared to that of the setup B. You would conclude that


Boojho’s uncle has set up an electroplating factory near his village. He should dispose off the waste of the factory


Paheli set up an experiment using liquid A in the beaker as shown in the following figure. She observed that the bulb glows. Then she replaced the liquid A by another liquid B. This time the bulb did not glow. Boojho suggested replacing the bulb by an LED. They observed that the LED glows. Explain.


Observe the following circuits carefully. In which circuit will the bulb glow? Write Yes or No in the blank space provided along each of the circuit given in the figure.

(a)


Piece of coal

______

(b)


Iron nail

______

(c)


Eraser

______

(d)


Steel spoon

______

The terminal which is connected to a positive terminal of a battery is called ______.


Assertion: Parts of cars and bicycles are made iron with chromium coating.
Reason: Chromium does not corrode and resist scratches.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×