Advertisements
Advertisements
प्रश्न
Boojho and Paheli performed experiments taking similar bulbs and cells but two different solutions A and B as shown in the following figure.
 |
 |
| Boojho's Experiment | Paheli's Experiment |
| (A) | (B) |
They found that the bulb in the setup A glows more brightly as compared to that of the setup B. You would conclude that
पर्याय
higher current is flowing through the circuit in setup A
higher current is flowing through the circuit in setup B
equal current is flowing through both the circuits
the current flowing through the circuits in the two setups cannot be compared in this manner.
Advertisements
उत्तर
higher current is flowing through the circuit in setup A
Explanation:
Bulb in the setup A glows more brightly because higher current is flowing through the circuit in setup A, as solution Also better conductor of electricity than that of B.
APPEARS IN
संबंधित प्रश्न
If you pass current through copper sulphate solution, copper gets deposited on the plate connected to the ______ terminal of the battery.
Name three liquids, which when tested in the manner shown in Figure, may cause the magnetic needle to deflect.
Electroplating is an example for ______.
Which of the following metals is used in electroplating to make objects appear shining?
Electroplating of ______ is done on objects like water taps and cycle bell to give them a shiny appearance.
Paheli set up an experiment using liquid A in the beaker as shown in the following figure. She observed that the bulb glows. Then she replaced the liquid A by another liquid B. This time the bulb did not glow. Boojho suggested replacing the bulb by an LED. They observed that the LED glows. Explain.
Liquids that conduct electricity are the solutions of ______.
Assertion: Parts of cars and bicycles are made iron with chromium coating.
Reason: Chromium does not corrode and resist scratches.
State some advantages of electroplating.
What are anodes and cathodes?
