Advertisements
Advertisements
प्रश्न
Three bulbs A, B, C are connected in a circuit as shown in the following figure. When the switch is ‘ON’
पर्याय
bulb C will glow first.
bulb B and C will glow simultaneously and bulbs A will glow after some time.
all the bulbs A, B and C will glow at the same time.
the bulbs will glow in the order A, B and C.
Advertisements
उत्तर
all the bulbs A, B and C will glow at the same time.
Explanation:
If the three bulbs A, B and C are connected in parallel in the circuit and the switch is turned on, then all of them will receive the same voltage simultaneously. This results in all the bulbs glowing at the same time.
If they are connected in series, they would all light up in the same order as the current flows, but typically, in a standard setup, parallel connection is the most common for all bulbs to glow at the same time when the switch is turned on.
APPEARS IN
संबंधित प्रश्न
Draw circuit symbols for
an open switch
Explain with the help of a labelled circuit diagram how you will find the resistance of a combination of three resistors, or resistance R1, R2 and R3, joined in parallel. Also mention how you will connect the ammeter and the voltmeter in the circuit when measuring the current in the circuit and the potential difference across one of the three resistors of the combination.
Who will spend more electrical energy? 500 W TV Set in 30 mins, or 600 W heater in 20 mins?
Write the condition required for a circuit to be a closed circuit.
______ is the device used to close or open an electric circuit.
Draw the circuit diagram for the series connection.
Draw the circuit diagram for the following series connection
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
Three bulbs are connected end to end from the battery. This connection is called _______.
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
