Advertisements
Advertisements
प्रश्न
The given figures 1 to 3 show the working of a simple A.C. generator. Study the diagrams and answers of the following questions.



(i) State and explain the principle underlying the working of a simple generator.
(ii) Where is the loop of wire placed?
(iii) What happens when the loop is rotated?
(iv) Indicate the direction of the current flow through the wire for the first half of the turn (in first figure). Name and state the rule used in finding the direction of the current.
(v) Indicate the direction of the current for the case shown in second figure.
(vi) Indicate the direction of current in the outer circuit (i.e., electric bulb) in first and third figure.
(vii) What type of current is shown in the above diagrams? Explain.
Advertisements
उत्तर
(i) The generator works on the principle of Electromagnetic Induction. Whenever the flux passing through a closed circuit changes, e.m.f. is induced in it and a current begins to flow. Its direction is given by Fleming’s Right Hand Rule or Lenz Law. As long as the loop is moving within the magnetic field an electric current will flow.
(ii) The loop of wire is placed between the two poles of a ‘U’-shaped magnet.
(iii) When the loop of wire is rotated between the two poles of a ‘U’-shaped magnet an electric current flows through the wire.
(iv) As rotation of the coil is the clockwise direction and the direction of magnetic field is from right to left, the current will flow in the anticlockwise direction, i.e., from B2 and B1. The law used is Lenz’s law.
Lenz’s law: “The direction of the induced e.m.f. is such that it opposes the change responsible for its production.”
(v) No electric current flows when the loop of wire is halfway through the turn, i.e., at an angle of 90° [as sin 90° = 0.]
(vi) First figure: From brush B2 to B1
Third figure: From brush B1 to B2
(vii) The type of current shown is an alternating current or A.C. current. When the loop of wire makes the second half of the turn (fig., the direction of the electric current through the bulb is reversed and it flows back in the opposite direction.
APPEARS IN
संबंधित प्रश्न
State whether the following statement is true or false.
An electric motor converts mechanical energy into electrical energy.
Why are Thermal Power Stations usually located near a river?
State two ways in the which the current alternating current and direct current?
The current induced in a closed circuit only if there is ______.
In an a.c. generator the speed at which the coil rotates is doubled. How would this affect
- the frequency of output voltage,
- the maximum output voltage is doubled.
Suggest two ways in an a.c. generator to produce a higher e.m.f.
State one advantage of using a.c. over d.c.
The part of the AC generator that passes the current from the armature coil to the external circuit is ______.
An AC generator is provided with ______ slip rings that rotate with the coil.
Observe the following diagram and answer the questions.

- Explain the construction of the equipment shown in the figure.
- How is AC generated?
