Advertisements
Advertisements
प्रश्न
Show with the aid of a diagram how a wire is wound on a U-shaped piece of soft iron in order to make it an electromagnet. Complete the circuit diagram and label the poles of the electromagnet.
Advertisements
उत्तर
End A turns into an S-pole and End B into an N-pole. A pair of limbs wind in the opposite direction.
APPEARS IN
संबंधित प्रश्न
Why is soft iron used as the core of the electromagnet in an electric bell?
Electromagnets are made up of :
The strength of the electromagnet can be increased by
How is an electromagnet made? Name two factors on which the strength of magnetic field of the electromagnet depends.
The following figure shows a coil wound around a soft iron bar XY.
- State the polarity at the ends X and Y as the switch is pressed.
- Suggest one way of increasing the strength of electromagnet so formed.
A coil of insulated copper wire is wound around a piece of soft iron and current is passed in the coil from a battery. What name is given to the device so obtained? Give one use of the device mentioned by you.
State two ways through which the strength of an electromagnet can be increased.
State two differences between an electromagnet and a permanent magnet.
Why is soft iron used as the core of the electromagnet in an electric bell?
Name the material used for making the armature of an electric bell. Give a reason for your answer.
Explain, why steel is used in preference to soft iron for making permanent magnets while soft iron is used in preference to steel for making electromagnets.
What is an electroscope? Describe the different stages of charging a gold leaf electroscope negatively with the help of a diagram.
Unlike magnetic poles ______ whereas like poles ______.
Assertion (A): When 2 long parallel wires, hanging freely are connected in parallel to a battery, they come closer to each other.
Reason (R): Wires carrying current in opposite directions repel each other.
Explain the working of the following device.
Speaker
